3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

instrument cluster Help ASAP

Old May 27, 2012 | 11:41 AM
  #1  
countryboy502ss's Avatar
countryboy502ss
Thread Starter
|
Amateur
Joined: Dec 2009
Posts: 26
Likes: 0
From: Chalmette, LA
Default instrument cluster Help ASAP

Truck: 2007 early Ram 2500 4x4

Problem:I was Replacing the lights in the instrument cluster with LED and everyting was going fine, well I cam to the part of taking the instrumnet cluster apart and I broke one of he gague needles, fuel to be exact. Well I was able to switch the guage motor behind the circuit board with the one for the voltmeter. I dont want to order a new cluster. I need to find where to order a needle and guage motor.

Thank you for you help
 
Reply
Old May 27, 2012 | 12:00 PM
  #2  
boosted-fc3s's Avatar
boosted-fc3s
Professional
Joined: Oct 2011
Posts: 198
Likes: 1
From: Illinois
Default

I don't think there is even a p/n for a needle. Junkyard cluster for donor parts?
 
Reply
Old May 27, 2012 | 08:08 PM
  #3  
Dudemanbrother's Avatar
Dudemanbrother
Professional
Joined: May 2011
Posts: 186
Likes: 0
From: Everett, wa
Default

The needle just pops on and off without replacing the motor. Junk yard is your best bet.
 
Reply
Old May 28, 2012 | 12:39 PM
  #4  
countryboy502ss's Avatar
countryboy502ss
Thread Starter
|
Amateur
Joined: Dec 2009
Posts: 26
Likes: 0
From: Chalmette, LA
Default

is there a p/n for the motor??

and is the 2002-2008 needles and motors all the same
 
Reply
Old May 28, 2012 | 12:50 PM
  #5  
dirtydog's Avatar
dirtydog
Moderate User
15 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default

Originally Posted by countryboy502ss
is there a p/n for the motor??

and is the 2002-2008 needles and motors all the same
no part #'s for the stepper motors and as far as the clusters go, 2006-2008 should be the same. I know a few things on the inside changed after 2005 so not too sure if 2002.5-2005 motors will work???
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:46 AM.