3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Clunk/Thud after cold start

Thread Tools
 
Search this Thread
 
  #1  
Old 11-28-2012 | 12:16 PM
Andris's Avatar
Andris
Thread Starter
|
Registered User
Joined: Nov 2012
Posts: 2
Likes: 0
Default Clunk/Thud after cold start

Hi everyone, I thank you all in advance if you are able provide some insight. I have a 2006 Ram 1500 with about 71000 KM's on it. Very recently and after having bushings replaced, after the truck has sat for awhile and is cold, once I start it and after a few seconds, there is a thud coming from underneath possible centre of truck. Anyone come across this? Any ideas?

Again thanks in advance if you are able to help.
 
  #2  
Old 11-30-2012 | 02:54 PM
DodgeCACares's Avatar
DodgeCACares
Record Breaker
Joined: Jul 2012
Posts: 1,085
Likes: 4
Default

Originally Posted by Andris
Hi everyone, I thank you all in advance if you are able provide some insight. I have a 2006 Ram 1500 with about 71000 KM's on it. Very recently and after having bushings replaced, after the truck has sat for awhile and is cold, once I start it and after a few seconds, there is a thud coming from underneath possible centre of truck. Anyone come across this? Any ideas?

Again thanks in advance if you are able to help.

Andris,

Did the thud start after the bushings were replaced or was it there before? Were the bushing replaced independently or at a Dodge dealer?

If the repairs were done at a dealership and you'd like me to review this further for you feel free to send me a PM. If it was done independently you might want to review with the servicing garage.
 
  #3  
Old 11-30-2012 | 05:44 PM
Andris's Avatar
Andris
Thread Starter
|
Registered User
Joined: Nov 2012
Posts: 2
Likes: 0
Default

It was done independently. Thank you for responding and I will follow up with the garage.
 



Quick Reply: Clunk/Thud after cold start



All times are GMT -4. The time now is 11:17 PM.