My truck was acting all fine yesterday but when I got in this morning it wouldn't start. The truck turns over but doesn't want to start. I have a OBDII/EOBD scanner from a friend but it's not giving me any codes to look up and see whats wrong. Do y'all have any suggestions?

 

For future reference:
https://dodgeforum.com/forum/dodge-r...s-section.html

 

Do you hear your fuel pump kick in when you turn the key to on? It should go for a few seconds to build pressure. If you don't, probably the fuel pump.

 

JasonW- Thank you sir for the info. I do apologize for posting this in the wrong place.

66three83-Yeah I can hear the fuel pump kick in.

 

Also last saturday I drove through some High water to get home. Now that I look under the truck it looks like the oil pan is dripping. How could I test to see if the engine took on water? The truck ran fine for from Saturday though Friday morning when I tried to start it up. I also checked the pressure of the gas flow on the engine. When its off or the key in the start position should it still spray out? when I used a screw driver on the pressure valve it just sputtered out.

 

use a fuel pressure gauge. It will also tell you if the pump is bleeding back. You may have water in a connector as well. Wire dryer works great for drying out plugs.