Stuck in 4wd
#1
Stuck in 4wd
i have a 2007 dodge ram 1500 and it doesn't come out of 4wd , on the dash it shows 4wd but when I move the switch to 2wd it blick in 4wd but doesn't switch for nothing , Ive tired moving in reverse but nothing it just says on the dash 4wd drive even though the switch is on 2wd what do I do ? please help
#2
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,598
Likes: 0
Received 96 Likes
on
81 Posts
You could have a bad Transfer case control module (TCCM) or transfer case motor. I would have the TCCM scan for codes and start from there. There was a problem a few years ago that the wire harness going to the TCCM, goes thru the bulkhead/firewall on the driver side and near the park brake ratchet and shorting out the wires. I would still have vehicle check for codes.
#3
Most important thing to do is take it to a electrical mechanic and get it checked and the transfer case it has we put it on about 2 days ago but it was used , but when u move the switch to 2wd you can hear the motor moving in the transfer case but sounds like it is stuck ? Is there any other way to probably get it out of 2wd