When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Its driving me nuts!!! anyone know how to get it to shut off?? (besides the obvious) I am in and out of my truck alot, and don't usually put the belt on unless going for a long drive. This chime is making me CRAZY!
Thanks, gonna check it out now... and by the way, I don't EVER read manuals!!! I don't know why, life would be much easier if I read the manuals, I think I just like to be stressed! HA! thanks again...
I actually went to the manual first and followed the steps but still have the chiming noise. I gave up but would still like to get rid of the bell. Any ideas? I have the '04 1500 QC.
it didn't work for me the first time either, the oonly thing I can think of is after clipping and unclipping 3 times, make sure you leave the last one in the clip, then turn the truck off, but don't turn the key all the way back, once you hear the chime, you know it worked. oh yeah, also make sure you do it all within 10 seconds...
Yes, it's been my experience if these sort of things don't work, it's because we either missed a step, were too slow, or didn't quite do something EXACTLY correctly--like anything via computer.