3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2003 differential assembly

Old Oct 19, 2015 | 03:26 PM
  #1  
Sam Alicea's Avatar
Sam Alicea
Thread Starter
|
Registered User
Joined: Oct 2015
Posts: 1
Likes: 0
Default 2003 differential assembly

I own a 2003 Ram 1500 4x2 and I need the whole differential assembly. Its been very hard to find it and I wanted to know if the differential from other Rams fit my truck. Would like to know if I could buy an 07 differential assembly for my 03.
 
Reply
Old Oct 19, 2015 | 06:51 PM
  #2  
TejasMtnBiker's Avatar
TejasMtnBiker
Captain
Joined: Mar 2005
Posts: 663
Likes: 0
From: Dallas
Default

buy a junk yard axle, gut the old parts & have a shop rebuild it, then just swap out your old axle, on one of those 3 days weekends before its cold
 
Reply
Old Oct 20, 2015 | 04:54 PM
  #3  
HemiLonestar's Avatar
HemiLonestar
Banned
Joined: Nov 2005
Posts: 3,739
Likes: 8
From: MD
Default

You should be able to use anything from an 02-08 1500.
 
Reply
Old Nov 11, 2015 | 09:15 PM
  #4  
Pkm10950's Avatar
Pkm10950
Registered User
Joined: Nov 2015
Posts: 3
Likes: 0
Default Swapped mine last year

I swapped my rear diff out with an 02 or 03 2 wheel drive unit on my 02 1500 4wd when my pinion but fell out and I lost my drive shaft! I noticed that the 2wd rear I installed did not have the flat metal stopper plates welded onto it, like my 4wd unit had. I cut them off of my original rear and still have not welded them on the replacement 2wd rear, but it hasn't been an issue. Be sure to use new u-bolts and a new pinion nut if you remove it from the replacement rear or need to install one. Good luck!
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:22 AM.