Long time troll, first time poster. I've found a few similar issues by searching but nothing that close

Just yesterday, I went to roll down my passenger side front window. And it decided to just stop working. I didn't notice any issues with the window prior, it was going up and down at a normal speed

Now, the driverside switch . . Does absolutely nothing. The window will not open or close.

However, the passenger side switch will allow the window to go down. But not back up.

Anyone have an suggestions on where to start looking? I'm assuming it's either gonna be: the master switch, passenger side switch, the actuator, the motor took a sh**, or the wires?

 

Sounds like good places to start. If the window works normally from the passenger switch then you can safely assume it's not the motor or the passenger switch. Focus on the driver switch. Possible the contacts are corroded.

 

Sounds like a bad master switch.

 

Got the same issue with passenger side. Running in random. Will follow this thread.

 

That's my thought as well.

 

Which truck is this? Need to know so I can find the wiring diagrams.

 

I'm gonna guess broken ORANGE/GRAY WIRE from driver door to front passenger door.

 

Interesting... mine has sort of the opposite problem. Passenger side switch is intermittent, but the driver's side is fully functional. And my passenger heated mirror doesn't work.

I haven't opened up the passenger door yet to check connections, nor have I pulled the passenger door switch module. It's all about the time!

 

SKIAHH: looks like your '03 heated mirror problem is gonna be in that passenger door like you say. Everything else is in common with the left side.
The heater element is on pins 11 and 13 of connector 302 in the side panel in front of the door, or pins 1 and 5 on the mirror.