3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2005 Ram 1500 check gauges/oil pressure

Thread Tools
 
Search this Thread
 
Old Oct 5, 2016 | 12:52 PM
  #1  
John Quinones's Avatar
John Quinones
Thread Starter
|
Registered User
Joined: Oct 2016
Posts: 4
Likes: 0
Default 2005 Ram 1500 check gauges/oil pressure

Every morning when I start the truck the oil pressure gauge never goes up and my check gauges light comes on. So I have to start it a second time before it reads. This gets very annoying having to start my truck two times in a row. It seems to do it more often when it is cold outside.

Thanks
 
Reply
Old Oct 5, 2016 | 03:21 PM
  #2  
rtmtrrdr's Avatar
rtmtrrdr
All Star
15 Year Member
Joined: Jan 2008
Posts: 778
Likes: 9
From: College Station
Default

Originally Posted by John Quinones
Every morning when I start the truck the oil pressure gauge never goes up and my check gauges light comes on. So I have to start it a second time before it reads. This gets very annoying having to start my truck two times in a row. It seems to do it more often when it is cold outside.

Thanks
Mine use to do that when it cold outside.i changed the oil and it stopped. That was at the end of last winter. We'll see this winter if it still does it
 
Reply
Old Oct 6, 2016 | 03:52 AM
  #3  
Chet Ubetcha's Avatar
Chet Ubetcha
3rd Gen Ram Moderator
Joined: Jul 2005
Posts: 1,596
Likes: 16
From: Cádiz, Spain
Default

Oil pressure sending unit on the way out?
 
Reply
Old Nov 24, 2016 | 02:11 PM
  #4  
dodgenitto's Avatar
dodgenitto
Record Breaker
Joined: Dec 2007
Posts: 1,282
Likes: 0
From: Fairplay Colorado
Default

Originally Posted by Chet Ubetcha
Oil pressure sending unit on the way out?
Mines been doing that at cold start for years. I live at 10,300' and when we just started to get mornings near 0° it started happening occosionally again. I'll shut off the truck and restart once warmed up when it happens, just to get "check gauges" light to go away.
 
Reply
Old Nov 26, 2016 | 12:05 PM
  #5  
ALW1's Avatar
ALW1
Amateur
Joined: Feb 2012
Posts: 40
Likes: 0
Default

Do your front timing cover and water pump gaskets seal properly? Mine had a slight leak above the sender and caused it to not work. Changing the sender worked for a while until the new one got wet
 
Reply
Old Nov 26, 2016 | 03:29 PM
  #6  
Dodgevity's Avatar
Dodgevity
Champion
10 Year Member
Liked
Loved
Community Favorite
Joined: Oct 2013
Posts: 3,772
Likes: 449
From: Atlanta
Default

Replace sender, test pressure with pressure gauge after removing sender. Run a round of motor flush to clean up oil passages. I did all these things when I heard the "ding".
 
Reply




All times are GMT -4. The time now is 02:39 PM.