When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
My ram is not engaging in 44wd..I changed the transfer case motor and new selector switch.if I rotate the front axles by hand off the ground the actuator kicks in and lights up dash light,but if I turn switch I get no flashing light or anything.I do have power going to the switch from the key on position...help.please.
Have you tried having the tcase shift motor out but plugged in and testing if it works? Is power getting to the shift motor? You say it engages when you spin the front with it jacked up, have you tried engaging 4wd while driving instead of at a stop?