3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Erro code po222

Thread Tools
 
Search this Thread
 
Old Apr 12, 2019 | 04:32 PM
  #1  
Derrick d's Avatar
Derrick d
Thread Starter
|
Registered User
Joined: Apr 2019
Posts: 2
Likes: 0
Default Erro code po222

Put a new camshaft and lifters in i have sever codes poping up now never had. Them code.po108
Po113
Po123
Po222
 

Last edited by Derrick d; Apr 12, 2019 at 04:33 PM. Reason: Can someone point me in the wright way
Reply
Old Apr 12, 2019 | 04:34 PM
  #2  
Derrick d's Avatar
Derrick d
Thread Starter
|
Registered User
Joined: Apr 2019
Posts: 2
Likes: 0
Default

Put a new camshaft and lifters in
 
Reply
Old Apr 12, 2019 | 04:58 PM
  #3  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,385
Likes: 4,211
From: Clayton MI
Default

P0113: IAT sensor.
P0123: Throttle position sensor.
P0222: Throttle pedal position sensor...

Make sure everything is plugged in properly.
 
Reply
Old Apr 12, 2019 | 08:04 PM
  #4  
72rtchallenger's Avatar
72rtchallenger
Professional
Joined: Jan 2006
Posts: 205
Likes: 12
From:
Default

P0108 Possible causes---- Faulty Manifold Absolute Pressure sensor--- Manifold Absolute Pressure harness is open or shorted---- Manifold Absolute Pressure sensor circuit poor electrical connection----- Faulty Engine Control Module (ECM)
With all the work you just did and other codes I would go over wiring and plugs that you were working around for breaks or that have shorted out
 

Last edited by 72rtchallenger; Apr 12, 2019 at 08:08 PM.
Reply
Old Apr 12, 2019 | 08:38 PM
  #5  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,385
Likes: 4,211
From: Clayton MI
Default

Yeah, a pinched harness somewhere seems perfectly reasonable.
 
Reply




All times are GMT -4. The time now is 10:31 PM.