3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2005 ram 1500 5.7 help

Old Jun 27, 2019 | 08:12 PM
  #1  
055.7ram's Avatar
055.7ram
Thread Starter
|
Registered User
Joined: Jun 2019
Posts: 6
Likes: 0
Default 2005 ram 1500 5.7 help

I got a 05 ram 1500 5.7 with a tuner in it the trucks idles fine in park and neutral but when put in drive or reverses it idels poor and it will drive fine sometimes but then sometimes it drive like it has dead cylinders ive put new plugs wire coils o2 sensors and still dose it can anyone point me into another area to lookin into thanks
 
Reply
Old Jun 27, 2019 | 09:02 PM
  #2  
TejasMtnBiker's Avatar
TejasMtnBiker
Captain
Joined: Mar 2005
Posts: 663
Likes: 0
From: Dallas
Default

whats the key jingle codes show?
 
Reply
Old Jun 28, 2019 | 06:12 AM
  #3  
055.7ram's Avatar
055.7ram
Thread Starter
|
Registered User
Joined: Jun 2019
Posts: 6
Likes: 0
Default

Originally Posted by TejasMtnBiker
whats the key jingle codes show?
When it frist started it was codes for multiple miss fires put new plugs wire an coils then i pulled the codes and it was still miss fire cleared it again then it was 8 codes for o2 sensor put new o2sensors in and cut the cats out. Then last night i pulles the codes again now it is misfire and o2 sensor and fuel to rich
Took the tune off it to see if it would make a difference but didnt was kinda thinking maybe a valve problem but dont hear nothing besides exhaust leak
 
Reply
Old Jun 28, 2019 | 07:08 AM
  #4  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,465
Likes: 4,220
From: Clayton MI
Default

What plugs did you put in?
 
Reply
Old Jun 28, 2019 | 07:19 AM
  #5  
055.7ram's Avatar
055.7ram
Thread Starter
|
Registered User
Joined: Jun 2019
Posts: 6
Likes: 0
Default

Plugs are ngk
 
Reply
Old Jun 28, 2019 | 07:19 AM
  #6  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,465
Likes: 4,220
From: Clayton MI
Default

Copper?
 
Reply
Old Jun 28, 2019 | 07:29 AM
  #7  
055.7ram's Avatar
055.7ram
Thread Starter
|
Registered User
Joined: Jun 2019
Posts: 6
Likes: 0
Default

Yes cooper
 
Reply
Old Jun 28, 2019 | 07:44 AM
  #8  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,465
Likes: 4,220
From: Clayton MI
Default

Exhaust leak might be a contributor.......

Disconnect the O2 sensors, and see if it runs any different.
 
Reply
Old Jun 28, 2019 | 07:52 AM
  #9  
055.7ram's Avatar
055.7ram
Thread Starter
|
Registered User
Joined: Jun 2019
Posts: 6
Likes: 0
Default

I did unhook all the 02 sensor should of said that but it didnt make any different
 
Reply
Old Jun 28, 2019 | 08:18 AM
  #10  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,465
Likes: 4,220
From: Clayton MI
Default

What's fuel pressure look like? Have you tried swapping injectors on the cylinders that are misfiring, see if the miss moves with the injector?
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 04:17 PM.