I have a 08 Dodge Ram 1500 SLT. I have no power going to my front actuator except One wirer out of the 3 I replaced the actuator two new ones and the same thing nothing I can hear the transfer case one making noise but not front one I replaced the 4wd switch inside truck and nothing besides the 4x4 light just flashing. I need help I tryed everything and nothing any help out there please

 

I check all 4 wires and only one wirer has Constant power but there is nothing for the other 3 wires anyone know why

 

what year, what cab configuration?

 

2008 Dodge Ram 1500 slt

 

What actuator are you talking about?

 

I check for power in main harness where it connects to main harness I still only have power going to one wirer

 

I've only had floor shift transfer cases, so no experience with the dash mounted transfer case switches. I just googled "dodge ram 4x4 flashing" and found a thread say that putting it in 4LO then into 4HI tends to cure the problem.

 

Lol I tried all that I am out of ideas

 

I'd get a factory service manual and look at the connector pinouts and general operation to identify some things you can start eliminating as issues.

 

Say I was wondering if anyone knows what the wirer harness is called that hooks into actuator that goes to main harness