When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Its a 2wd i found a 2007 out of a jeep its a 5.7 my ram has a 5.7 in it was looking at getting it but want to know if it will work in my truck an if i have to change anything ro make itwork
Its a 2wd i found a 2007 out of a jeep its a 5.7 my ram has a 5.7 in it was looking at getting it but want to know if it will work in my truck an if i have to change anything ro make itwork
Someone else can tell you about if the computers will work or if you need to reflash. Since the bodies are different, you may need to swap the exhaust manifolds, intake and possible oil pan. The oil pan will be either a front, center or rear sump pan. If they look identical on the pan, you may not need to swap them. With the engine out, now would be a good time to check the expansion plugs, any oil leaks and generally clean the engine up. Personally, I'd drop the pan anyway just to check for debris or sludge.