Figured out why I couldn't get the spare down....
#11
RE: Figured out why I couldn't get the spare down....
Well, if the lugnuts are at the specified torque, it probably won't matter if anyone can get the tire down since they'll probably never get the nuts loose with the standard tool.[:@]
If one has a female who might change a tire, I'd heartily recommend one of the little mechanical torque multipliers some of the specialty car part catalogs carry.
Keep the flat spot up!
If one has a female who might change a tire, I'd heartily recommend one of the little mechanical torque multipliers some of the specialty car part catalogs carry.
Keep the flat spot up!
#12
#13
#14
RE: Figured out why I couldn't get the spare down....
If you live in an area where they salt the roads, I would loose the spare tire lock. You will probably not get it to unlock when you need your spare. Been there and it's was not a fun experience. I'd rather take the extrememly low risk that someone might steel my spare.
#15
RE: Figured out why I couldn't get the spare down....
Im in Canada and they just use a small piece of braded wire and a padlock, they give you 2 small brass keys with your truck... I was like, wtf are these two little keys... I looked under the truck and there's a padlock hanging down... :P
#16