3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Brake switch cold wire for brake controller

Thread Tools
 
Search this Thread
 
  #1  
Old 07-11-2023, 04:09 PM
dbartho1's Avatar
dbartho1
dbartho1 is offline
Registered User
Thread Starter
Join Date: Jul 2023
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Brake switch cold wire for brake controller

I have a 2005 Dodge Dakota 3.7 v6 with no tow package. I hard wired all other connections, but cannot determine where to tie in the red wire coming from the brake controller to the brake switch. Here are the color designations: Green/white stripe, Black/brown stripe, Purple/yellow stripe, Purple/white stripe, White/blue stripe, and Grey/red stripe. I have attached a pic of the connector. Any help is much appreciated!
 
  #2  
Old 07-11-2023, 05:50 PM
dbartho1's Avatar
dbartho1
dbartho1 is offline
Registered User
Thread Starter
Join Date: Jul 2023
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Brake switch cold wire for brake controller

Figured it out - it was the white wire with the blue strip. The grey wire with the red strip is constant power.
 
  #3  
Old 07-11-2023, 06:13 PM
aleekat's Avatar
aleekat
aleekat is offline
Veteran
Join Date: Jul 2013
Location: TN
Posts: 268
Received 41 Likes on 35 Posts
Default

You do realize this is a Ram forum?
 



Quick Reply: Brake switch cold wire for brake controller



All times are GMT -4. The time now is 03:52 PM.