3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Brake switch cold wire for brake controller

Old Jul 11, 2023 | 04:09 PM
  #1  
dbartho1's Avatar
dbartho1
Thread Starter
|
Registered User
Joined: Jul 2023
Posts: 4
Likes: 0
Default Brake switch cold wire for brake controller

I have a 2005 Dodge Dakota 3.7 v6 with no tow package. I hard wired all other connections, but cannot determine where to tie in the red wire coming from the brake controller to the brake switch. Here are the color designations: Green/white stripe, Black/brown stripe, Purple/yellow stripe, Purple/white stripe, White/blue stripe, and Grey/red stripe. I have attached a pic of the connector. Any help is much appreciated!
 
Reply
Old Jul 11, 2023 | 05:50 PM
  #2  
dbartho1's Avatar
dbartho1
Thread Starter
|
Registered User
Joined: Jul 2023
Posts: 4
Likes: 0
Default Brake switch cold wire for brake controller

Figured it out - it was the white wire with the blue strip. The grey wire with the red strip is constant power.
 
Reply
Old Jul 11, 2023 | 06:13 PM
  #3  
aleekat's Avatar
aleekat
Veteran
10 Year Member
Liked
Loved
Joined: Jul 2013
Posts: 338
Likes: 55
From: TN
Default

You do realize this is a Ram forum?
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:01 AM.