4x4 Front Diff. ratio?
#11
RE: 4x4 Front Diff. ratio?
ORIGINAL: Hemi Dave
I'll be speaking with the Ram dealer this week to find out for sure on the Dodge front axle and otherwise I'll see if I can come up with the old GM specs too.
I'll be speaking with the Ram dealer this week to find out for sure on the Dodge front axle and otherwise I'll see if I can come up with the old GM specs too.
I'm almost scared to ask why you are even wondering about the front gears to begin with... [sm=bangbang.gif]
#12
RE: 4x4 Front Diff. ratio?
ORIGINAL: Hemi Dave
I'll see if I can come up with the old GM specs too.
I'll see if I can come up with the old GM specs too.
#13
RE: 4x4 Front Diff. ratio?
Hi guys!!!
Okay, the modern "full-time" Dodge trucks utilize the NV242 transfer case spec'dwith a 48/52 torque split indicating both front and rear axle gear ratios are identical.
The original '70's NP203 full-timers ran slightly different ratios front and rear, i.e. 3.54/3.55. Whichever end has the shorter gear set gets the majority of power in unlocked mode.
This subject always screws people up. LOL
Okay, the modern "full-time" Dodge trucks utilize the NV242 transfer case spec'dwith a 48/52 torque split indicating both front and rear axle gear ratios are identical.
The original '70's NP203 full-timers ran slightly different ratios front and rear, i.e. 3.54/3.55. Whichever end has the shorter gear set gets the majority of power in unlocked mode.
This subject always screws people up. LOL
#15
RE: 4x4 Front Diff. ratio?
ORIGINAL: rob[GL]
WAIT A SEC GUYS!!!
I think everyone here is getting a little carried away...
Besides, you're *ALL* wrong.
The gears are a 3.92!
WAIT A SEC GUYS!!!
I think everyone here is getting a little carried away...
Besides, you're *ALL* wrong.
The gears are a 3.92!
ORIGINAL:Hemi Dave
I'll be speaking with the Ram dealer this week to find out for sure on the Dodge front axle and otherwise I'll see if I can come up with the old GM specs too.
I'll be speaking with the Ram dealer this week to find out for sure on the Dodge front axle and otherwise I'll see if I can come up with the old GM specs too.
#16