When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
P1501 code, no ABS light but cruise control not working
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
P1501 code, no ABS light but cruise control not working
Yes, I also replaced that sensor, but didn't change anything. According to the technical documents that sensor is not connected to the ABS module and cruise control.
Do you have four ABS. Or RWAL ABS. That means sensors at the front and rear or Just at the rear. If you have a scanner that can read ABS, you can jack up the truck with jack stands under it. Rotate each tire and read the RPM numbers. If you have zero at one wheel. You found the cause. Next step is to find out if you have a open wire or sensor. I have had Clock springs cause the same problem and also cause the vehicle to pull when driving.
