3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Electrical or Mechanical

Thread Tools
 
Search this Thread
 
Old Mar 23, 2024 | 06:06 PM
  #1  
DogWater_Actual's Avatar
DogWater_Actual
Thread Starter
|
Registered User
Joined: Mar 2024
Posts: 3
Likes: 0
Default Electrical or Mechanical

08 Ram 1500 5.7 L V8 4x4 with the 06 fuse box. Truck was in an accident, left front wheel, from lower to upper control arms ripped off, inner left front axel shaft broken, busted rack and pinion, ripped the wires from the 20 pin under cab connecter. Repairs have been made, wires re-connected to mirror opposing side, Truck has power, everything on the inside along with lights outside works, but engine will not turn over. Battery has full charge, truck has set for nearly 6 months, no airbag deployment.
 
Reply
Old Mar 23, 2024 | 09:28 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,395
Likes: 4,213
From: Clayton MI
Default

Do you hear a click from the starter relay, or the solenoid?
 
Reply
Old Mar 31, 2024 | 04:53 PM
  #3  
DogWater_Actual's Avatar
DogWater_Actual
Thread Starter
|
Registered User
Joined: Mar 2024
Posts: 3
Likes: 0
Default

None, Changed out battery and replaced fuses, still nothing.
 
Reply
Old Mar 31, 2024 | 06:32 PM
  #4  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,395
Likes: 4,213
From: Clayton MI
Default

Tried starting in neutral?
 
Reply
Old Apr 22, 2024 | 11:25 PM
  #5  
DogWater_Actual's Avatar
DogWater_Actual
Thread Starter
|
Registered User
Joined: Mar 2024
Posts: 3
Likes: 0
Default Fixed

The ground on the actual starter was severely corroded, all the way into the unit, 2 ground points driver side frame and front of engine terminals badly damaged from corrosion. Cleaned all ground points replaced terminals and starter. Truck runs like new, thanks for the help in troubleshooting.
 
Reply
Old Apr 23, 2024 | 03:11 PM
  #6  
Prismatic's Avatar
Prismatic
All Star
10 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Dec 2012
Posts: 895
Likes: 56
Default

When a user returns to bring closure to a thread




 
Reply




All times are GMT -4. The time now is 11:02 PM.