3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Has anybody seen these before??

Thread Tools
 
Search this Thread
 
Old Feb 27, 2006 | 02:18 AM
  #1  
bandit96's Avatar
bandit96
Thread Starter
Joined: Jul 2004
Posts: 42
Likes: 0
Default Has anybody seen these before??

Check this out and do you guys think it is worth it. Im going to install a sway bar on my ram but maybe this too.

http://www.activesuspension.com/index.htm
 
Reply
Old Feb 27, 2006 | 03:23 AM
  #2  
Stillborn's Avatar
Stillborn
Veteran
Joined: Oct 2005
Posts: 252
Likes: 0
From: Toronto
Default RE: Has anybody seen these before??

I doubt you'd need it on a new vehicle..
 
Reply
Old Mar 5, 2006 | 10:16 PM
  #3  
HemiLonestar's Avatar
HemiLonestar
Banned
Joined: Nov 2005
Posts: 3,739
Likes: 8
From: MD
Default RE: Has anybody seen these before??

I dunno about that thing, but I highly recommend the rear sway bar. Just make sure when you bolt it to your axle tubes that you leave clearance for that little hard brake line. My 03 QC handles SOOOO much better with it.
 
Reply
Old Mar 6, 2006 | 01:55 PM
  #4  
rob[GL]'s Avatar
rob[GL]
All Star
Joined: Nov 2004
Posts: 962
Likes: 0
From:
Default RE: Has anybody seen these before??

With a webpage like that, I'd be hard pressed to find myself ordering anything from them... hehe
 
Reply
Old Mar 6, 2006 | 05:34 PM
  #5  
osteodoc08's Avatar
osteodoc08
Record Breaker
Joined: Feb 2005
Posts: 2,192
Likes: 0
From:
Default RE: Has anybody seen these before??

I hope you don't have too many fillings to rattle looseLOL!!
 
Reply
Old Mar 6, 2006 | 10:09 PM
  #6  
Gone Fishin's Avatar
Gone Fishin
Record Breaker
Joined: Feb 2005
Posts: 2,309
Likes: 1
From: Bristol, IN
Default RE: Has anybody seen these before??

If you are looking for a progressive spring, you might consider the Helwig setup, or possibly adding airbags to the rear suspension.
Those things look really cheesy, and they don't look like they'll hold up very long, plus, after a while, I wouldn't be suprised to find they rattle like crazy
 
Reply
Old Mar 7, 2006 | 03:06 AM
  #7  
oppie311's Avatar
oppie311
Veteran
Joined: Dec 2005
Posts: 358
Likes: 1
From:
Default RE: Has anybody seen these before??

you don't need it unless you carry alot of heavy loads. But regardless, find a better company that has something other than drawings on the webpage.
 
Reply
Old Mar 7, 2006 | 07:34 AM
  #8  
stykthyn's Avatar
stykthyn
Professional
Joined: Nov 2005
Posts: 147
Likes: 0
From:
Default RE: Has anybody seen these before??

where do do you get sway bars? I have been wishing I had one
 
Reply




All times are GMT -4. The time now is 10:25 PM.