6.1 Cam swap
#21
RE: 6.1 Cam swap
helopilot, I am about to go into my 03 hemi and swap the cam with a 6.1l and will replace the valve springs with the 6.1 exhaust springs. What was the site you went to for install instructions? And why did you change the pushrods ? Which pushrods do you recomend and where did you get them? I was thinking about removing the heads to make life easy. Did you do the head removal when you did your swap? Sorry about all the questions , just need some advice before I go in.
#22
RE: 6.1 Cam swap
ORIGINAL: helopilot
You are right Nick, if I would of had enough money I would have got the Manley stuff, but we are not all rich like you.
You are right Nick, if I would of had enough money I would have got the Manley stuff, but we are not all rich like you.
LOL... No, not rich at all... I just save up untill I can afford the better parts, I also know the importance of the parts and I know how going cheap can cost me more money in the end... its either spend a little today and pay ALLOT more tomorrow OR Pay a little more today and be done with it. I wasnt trying to say you dont know what your talking about. nor was I trying to disagree with you. Its difficult to get points accross over the forums and I guess you have taken my points the wrong way... sorry!
I would like to here more about your findings... and where your resorces came from.... If the 6.1L cam springs are in fact a good replacment part then that will be good information to have... I still have my doubts unless the 6.1L springs are an actual aftermarket spring... then that would make since.
SPEED SAFE, AIR RAM
#23
RE: 6.1 Cam swap
ORIGINAL: eds2003ram
helopilot, I am about to go into my 03 hemi and swap the cam with a 6.1l and will replace the valve springs with the 6.1 exhaust springs. What was the site you went to for install instructions? And why did you change the pushrods ? Which pushrods do you recomend and where did you get them? I was thinking about removing the heads to make life easy. Did you do the head removal when you did your swap? Sorry about all the questions , just need some advice before I go in.
helopilot, I am about to go into my 03 hemi and swap the cam with a 6.1l and will replace the valve springs with the 6.1 exhaust springs. What was the site you went to for install instructions? And why did you change the pushrods ? Which pushrods do you recomend and where did you get them? I was thinking about removing the heads to make life easy. Did you do the head removal when you did your swap? Sorry about all the questions , just need some advice before I go in.
And DONT add the 6.1L pushrods to your 5.7L.... they are too long! The only time you would use 6.1L pushrods is if you had the 6.1L heads.
SPEED SAFE, AIR RAM
#25
#27
RE: 6.1 Cam swap
hey helopilot, I got the explanation about the pushrods but need your input on where you got the install instuctions and where you purchased the manley pushrods.
I just can't get why dodge decides to go with a three piece pushrod instead of a solid rod.
I would also like to know if you guys removed the heads to replce the springs or changed them with the heads on the engine?
Which way is the easest way to replace them?
I just can't get why dodge decides to go with a three piece pushrod instead of a solid rod.
I would also like to know if you guys removed the heads to replce the springs or changed them with the heads on the engine?
Which way is the easest way to replace them?
#30
RE: 6.1 Cam swap
The write-up for the install is here:
http://hemitruckclub.com/cam.htm
I left my heads on to replace the springs, but it a lot easier to do them with the heads off from my understanding.
Just make sure you do a lot of research before tackling this yourself for all of the tips and tricks as well as cautions.
Good luck!!
I bought my pushrods from here:
http://www.moesperformance.com/
I don't know whether AirRam carries them or not.
http://hemitruckclub.com/cam.htm
I left my heads on to replace the springs, but it a lot easier to do them with the heads off from my understanding.
Just make sure you do a lot of research before tackling this yourself for all of the tips and tricks as well as cautions.
Good luck!!
I bought my pushrods from here:
http://www.moesperformance.com/
I don't know whether AirRam carries them or not.