3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

what's everyone doing for exhaust?

Thread Tools
 
Search this Thread
 
Old Jan 30, 2007 | 04:40 PM
  #1  
whitey97's Avatar
whitey97
Thread Starter
|
Professional
Joined: Jun 2006
Posts: 141
Likes: 0
From:
Default what's everyone doing for exhaust?

i've got an 07 4.7 "big horn" and although the stock exhaust isn't too bad, i'm looking for something a touch more throaty. i was just going to take the muffler off, and replace it with a pipe, but it's a 3" pipe and for me to bend that, would be a bugger. any aftermarket replacement kits out there? or what is everyone using? normally i'm not on a budget, but this truck, i promised the wife, would remain stock. as my 97 s10 is bagged and body dropped, she made me promise if i got another truck, i wouldn't touch it, lol....anyone have any opinions? (on the exhaust situation, not the wife)
 
Reply
Old Jan 31, 2007 | 02:28 AM
  #2  
whitey97's Avatar
whitey97
Thread Starter
|
Professional
Joined: Jun 2006
Posts: 141
Likes: 0
From:
Default RE: what's everyone doing for exhaust?

oh come on, nobody wants to give a reply?
 
Reply
Old Jan 31, 2007 | 02:54 AM
  #3  
Ram fourpoint7's Avatar
Ram fourpoint7
Registered User
Joined: Dec 2006
Posts: 45
Likes: 0
From:
Default RE: what's everyone doing for exhaust?

I had a FLowmaster 50 series SUV muffler put on mine. Sounds good and it isn't too loud. I kept the resonator and had a stainless tip added so it looks and sounds much better for about $200.
 
Reply
Old Jan 31, 2007 | 01:25 PM
  #4  
Hellbilly1's Avatar
Hellbilly1
Veteran
Joined: Nov 2006
Posts: 378
Likes: 0
From:
Default RE: what's everyone doing for exhaust?

i put on a Aero Turbine 3030 on mine and dumped it cost me total about 200 bucks to do i used some of my stock exhaust pipe to make it custom but its loud as hell
 
Reply
Old Jan 31, 2007 | 01:59 PM
  #5  
Happydays's Avatar
Happydays
Joined: Feb 2006
Posts: 47
Likes: 0
From:
Default RE: what's everyone doing for exhaust?

I had a catback dual exhaust installed by Master Muffler (they do madrel bends) using the Dynoflow muffler and 3" stainless steel tips. Cost about $400. It's is pretty loud and has a resonance tone around town, but on the highway it's OK. May go to a quieter one though. Get's a little anoying around town, which is mostly the type of driving I do.
 
Reply
Old Jan 31, 2007 | 02:42 PM
  #6  
stump_breaker's Avatar
stump_breaker
Captain
Joined: Aug 2005
Posts: 560
Likes: 0
From:
Default RE: what's everyone doing for exhaust?

24" glasspacked muffler from the muffler shop. Incredible sound for $60 total install.
 
Reply
Old Jan 31, 2007 | 03:04 PM
  #7  
Rampower's Avatar
Rampower
Rookie
Joined: Dec 2006
Posts: 78
Likes: 0
Default RE: what's everyone doing for exhaust?

I have no muffler.. just pipe!!! sounds ****in wicked, LOUD so if your not wanting loud!! don't do it!
 
Reply
Old Jan 31, 2007 | 04:21 PM
  #8  
djr04's Avatar
djr04
All Star
Joined: Jul 2006
Posts: 807
Likes: 0
From: South Dakota
Default RE: what's everyone doing for exhaust?

I'm going to have an electric cutout installed right after the cat on my stock exhaust, so it can be super quiet or super loud.
 
Reply
Old Jan 31, 2007 | 04:49 PM
  #9  
xtremewheelz's Avatar
xtremewheelz
Joined: Jan 2007
Posts: 26
Likes: 0
From: Kimball, MI
Default RE: what's everyone doing for exhaust?

I had a Flowmaster 40 Series installed and had custom dual pipes bent around the spare tire area. The total cost was about $350, but that includes $120 for stainless Magnaflow tips. $230 for the muffler and the custom job done at the garage I took it to. It sounds bad-***. It's not too bad at an idle, but when you get on it you can really notice. I get tons of compliments everywhere I go. You'll love it!
 
Reply
Old Jan 31, 2007 | 10:30 PM
  #10  
cableguy1224's Avatar
cableguy1224
Veteran
Joined: Mar 2006
Posts: 379
Likes: 0
From:
Default RE: what's everyone doing for exhaust?

Magnaflow single exhaust here, not to loud but sounds sweet
 
Reply



All times are GMT -4. The time now is 06:51 PM.