I just did a search on Ebay under "wheel well liners" and there are several on there for good prices.

 

I bought a under coating gun at C.T. I had a oldmetal canfrom under coating that I used. Also bought from Napa a tube extension for the doors and wheel wheels. Napa sells a complete kit to do this. I probably willbuy it next time it goes on sale. Also oil sprays like ****on cooler days. Imake a point of doing it on a warm fall day.
Dan

 

I use a product call Corrosion X. It come bulk or arosol cans.
It penitrates between the metal at the seams even.
Its expensive but very good. (Its made for aircraft and aproved by the FAA)
It can be purchased thru "Aircraft Spruce" online.

 

having mine undercoated next weak, the salt that is being used in New york is killing our cars . these guys over due they laying of this stuff up hear. I am having it done at the same time as the Rino on my bed . It's a gel base material. Don't have the name but I'll get it to you guys once I come back from the shop. Hopefully this will stop the rust that is starting by my leafsprings and chasey. Any recomodations before I have itdone?

 

You should steam clean the underside well before undercoating...

 

how much does undercoating cost? rhino undercoating?

 

I'm In Long Island NY and the undercoating cost me $175. This is for a petrolium gel base coating. I think that undercoating your truck with the rino would be very expencive and don't know if the shop would do it cause in order to lay it properly they need toscratch upthe area that is being layed on.To do that to the whole underside would be a lot of labor time for preping. The rino on my 6ft bed was about $580 , and that's with the bed fully acsesable.