installed last night. Took my time and it took me about 45 minutes but i really made sure everything was attached tight and level and the clamps lined up across the bed. The only issue i had was the rubber on the tailgate was folded under and on the sides had numerous folds which i hope lay down as the weather heats up. Other than that it clamps down tight and is a great design.

 

A hair dryer will do wonders on the rubber seals. Mine sat right down after I heated them for a bit.

 

Ordered mine from Truckchamp on the 2/1 for 800, should be here this week.

Was 800, so I decided to do it..

I also ordered a Pop&Lock Electric tailgate lock, anyone tried one of these things yet? Was 70 bucks on Amazon, so it seemed like it would be worth it.

 

On second thought, moving my question to 3rd Gen, Sorry!

 

This thread has the best price and reseller information. The only question I have is: Was this the price for the 72203 cover or was it a different model?? I think for this price it's worth it to work the phones to finally get one.
Thanks
Pete

 

Finally picked one up used the ebay site and made an offer. I have the F1 model 72203 on it's way for $789 with shipping included. I'll let you know when it arrives

 

Got the tracking number on the 6th of June and at my door on the 8th of June. I can't wait to install it and see how it looks.

 

just ordered the F1 from truck champ, they matched ebay price of $800

 

on install with the bedliner where do you hook up the drain lines?

 

You actually drill a hole through the bed liner (not through the bed) and insert the hose into the hole. It uses the drains that are built into the truck bed to let the water flow out and onto the street. I actually drilled 2 holes one above the other to make the hole oval. This allowed the hose to go through with less of a sharp bend turning it downward.