4th Gen RAM general discussion/NON-tech This section is for general discussions about your 4th gen RAM. Non tech related RAM threads belong here.

2013 Ram Engine

Thread Tools
 
Search this Thread
 
  #1  
Old 09-28-2012, 09:41 PM
TheRiz's Avatar
TheRiz
TheRiz is offline
Amateur
Thread Starter
Join Date: Jan 2009
Location: LongIsland
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Default 2013 Ram Engine

I cant believe Dodge is offering the same v6 engine I have in my 2012 jeep wrangler ( 3.6 pentastar-285 horse) as a option in 2013 Ram at 305 horse. It will have an 8 speed auto trans behind it. That 3.6 is a tuff motor,but the jeep weights 3800lbs. I think Dodge mite be alittle off with this application.
 
  #2  
Old 09-28-2012, 09:52 PM
oldjeep's Avatar
oldjeep
oldjeep is offline
Champion
Join Date: May 2009
Location: MN
Posts: 3,497
Likes: 0
Received 1 Like on 1 Post
Default

They offer the 215HP 3.7 V6 right now, so the 3.6 sounds like an upgrade
 
  #3  
Old 09-28-2012, 10:14 PM
Cmerritt84's Avatar
Cmerritt84
Cmerritt84 is offline
Captain
Join Date: Sep 2011
Posts: 507
Likes: 0
Received 9 Likes on 7 Posts
Default

i wouldnt want it. not even in a RCSB with 4.56 gears
 
  #4  
Old 09-28-2012, 11:44 PM
LU229's Avatar
LU229
LU229 is offline
Banned
Join Date: Jun 2011
Posts: 1,770
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by TheRiz
I cant believe Dodge is offering the same v6 engine I have in my 2012 jeep wrangler ( 3.6 pentastar-285 horse) as a option in 2013 Ram at 305 horse. It will have an 8 speed auto trans behind it. That 3.6 is a tuff motor,but the jeep weights 3800lbs. I think Dodge mite be alittle off with this application.
They`re building it to compete against ford. Whats the point if they dont turbo charge it.
At best, it might beat the ford in a fuel miledge race, but thats about it.
 
  #5  
Old 09-29-2012, 06:19 PM
gutty96's Avatar
gutty96
gutty96 is offline
Veteran
Join Date: Jul 2010
Posts: 292
Likes: 0
Received 0 Likes on 0 Posts
Default

It really all comes down to application. I highly doubt there will be many (if any) of the 3.6 put into Quad/Crew cab 4x4's.

But, where they would make a good application is for construction sites, go for trucks, etc. Reg cab, long box 2wd seems like where most of the 3.6 will end up IMO.
 
  #6  
Old 09-29-2012, 09:22 PM
LU229's Avatar
LU229
LU229 is offline
Banned
Join Date: Jun 2011
Posts: 1,770
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by gutty96
It really all comes down to application. I highly doubt there will be many (if any) of the 3.6 put into Quad/Crew cab 4x4's.

But, where they would make a good application is for construction sites, go for trucks, etc. Reg cab, long box 2wd seems like where most of the 3.6 will end up IMO.
I agree
 
  #7  
Old 09-29-2012, 10:11 PM
marv02's Avatar
marv02
marv02 is offline
Captain
Join Date: Jul 2006
Location:
Posts: 585
Likes: 0
Received 0 Likes on 0 Posts
Default

I had a 2006 Ram 1500 Q Cab 6 speed manual good truck engine never gave me any kind of problems at all but it was way under powered for that much weight of the truck and the MPG was not all that great.

I now have a 2012 Crew cab 4X4 it gets about the same MPG and it gets about the same MPG as the old 2006 ram did.

For me I will never buy a V6 in a full size truck ever again.

Then again the 2012 is the last truck I ever buy it has a lifetime factory warranty.
 
  #8  
Old 10-12-2012, 02:32 PM
AZdave's Avatar
AZdave
AZdave is offline
Professional
Join Date: Jun 2009
Location: Oregon
Posts: 170
Received 1 Like on 1 Post
  #9  
Old 10-12-2012, 05:26 PM
Dale_K's Avatar
Dale_K
Dale_K is offline
Registered User
Join Date: Oct 2007
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

I have a 2012 Jeep Wrangler. I think the motor will do fine in a Ram pickup, especially since they're going to use an 8 speed. Be aware the Jeep guys have been seeing head failures on this motor. It's always the driver's side head and starts with ticking that progresses into a CEL with a misfire. Many hundreds of heads have been replaced. They revised the head design during the summer and there's been a second revision since then. The new head design might have fixed it. Nobody knows for sure. Chrysler has been pretty good about the warranty repairs. No trouble with mine so far.
 
  #10  
Old 10-12-2012, 08:06 PM
2010 TRX4's Avatar
2010 TRX4
2010 TRX4 is offline
Professional
Join Date: Oct 2011
Location: WMASS
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
Default

The 2013 3.6 Pentastar 305 hp option will cost around $1000.00
 


Quick Reply: 2013 Ram Engine



All times are GMT -4. The time now is 04:45 PM.