4th Gen RAM general discussion/NON-tech This section is for general discussions about your 4th gen RAM. Non tech related RAM threads belong here.

Finding Door Trims

Thread Tools
 
Search this Thread
 
  #1  
Old 01-22-2016 | 09:21 AM
00bigmattyc00's Avatar
00bigmattyc00
Thread Starter
|
Rookie
Joined: Apr 2014
Posts: 71
Likes: 0
Default Finding Door Trims

Guys, I saw that back in 2013/2014 area, Ram 1500 had an ECO DIESEL trim that was white with a black lower two tone. I was wondering if any of you know where I could find trim to convert my plain single color white Doors into those two tones. Pics attached of my 2013 Tradesman and the eco diesel that I saw a few of. Any help is appreciated.
 
Attached Thumbnails Finding Door Trims-1908211_10203368379635022_8448737051108360000_n.jpg   Finding Door Trims-dscn1369e.jpg  
  #2  
Old 01-22-2016 | 09:49 AM
jkeaton's Avatar
jkeaton
DF Admin
Joined: Apr 2010
Posts: 27,858
Likes: 353
From: Winston Salem, NC
Default

That's paint. You can paint yours just like that.
 
  #3  
Old 01-22-2016 | 09:53 AM
00bigmattyc00's Avatar
00bigmattyc00
Thread Starter
|
Rookie
Joined: Apr 2014
Posts: 71
Likes: 0
Default

Awesome! I am not a big painter (mechanical stuff I can handle but I dont do well with art haha) What would that run to have a paint shop do it? I found a kit called "Rocker Armor" and its more of a stick on decal made of the same material of spray in bed liners, but its like $220 so that is a little absurd to me. What do you think?
 
  #4  
Old 01-22-2016 | 10:07 AM
jkeaton's Avatar
jkeaton
DF Admin
Joined: Apr 2010
Posts: 27,858
Likes: 353
From: Winston Salem, NC
Default

Depends on how bad you want it. You can try Plastidip first to see if you actually like it. Having a shop paint it would be more than that decal cost though. It's not the paint, it's the labor for prep to get it ready for paint that will make it expensive.
 
  #5  
Old 01-25-2016 | 04:12 PM
00bigmattyc00's Avatar
00bigmattyc00
Thread Starter
|
Rookie
Joined: Apr 2014
Posts: 71
Likes: 0
Default

Yeah had a friend who knows someone who runs a palstidip place. I have plastidip trim in the past and it worked out well I may go that route. Thanks all for all the advice!
 
  #6  
Old 01-30-2016 | 10:08 PM
Reject's Avatar
Reject
Record Breaker
Joined: Dec 2010
Posts: 1,191
Likes: 1
From: Nova Scotia, CANADA
Default

You could have a Decal shop make Decal and apply them yourself, or have them do it. If you ever dont like it you can peel them off. Or Plasti-dip gives the same things, Easier to apply yourself, and on curves.
I wouldnt do Rocker Armour, as far as I know, its permanent. It's Bed-liner, and isnt easy to remove.
 



Quick Reply: Finding Door Trims



All times are GMT -4. The time now is 12:14 AM.