4th Gen RAM general discussion/NON-tech This section is for general discussions about your 4th gen RAM. Non tech related RAM threads belong here.

1500 5.7L to 2500 6.4L

Thread Tools
 
Search this Thread
 
Old Nov 12, 2016 | 07:03 PM
  #1  
Duroc's Avatar
Duroc
Thread Starter
|
Professional
Joined: Mar 2010
Posts: 196
Likes: 0
From: Morgan City, La
Default 1500 5.7L to 2500 6.4L

I have a 14' 5.7 Express Quad cab with 20in. wheels and have been pulling a 6350 dry weight TT. By the time I add gear, water in the tanks, wood etc; I could easily be at 7500lbs (just guessing). It pulls ok but hills are rough as you might expect. I have seen some good deals on 2016 2500 Tradesmans with the 6.4L. How much better do you think the 2500 gasser would pull my trailer? I'd love a Cummins but not quite there financially.
 

Last edited by Duroc; Nov 12, 2016 at 07:25 PM.
Reply
Old Nov 27, 2016 | 08:26 PM
  #2  
Hawk1775's Avatar
Hawk1775
Registered User
Joined: Nov 2016
Posts: 1
Likes: 0
From: Washington State
Default

I'm there with you when it comes to towing. I have a '11 1500 ST Quad-Cab with the 4.7 and although it can pull my bosses dump trailer it bogs down on hills really bad. I've been looking into a 2500 and/or 3500; when I looked into the differences between the 6.4 (gas) and the 6.7 (diesel) it came down to the mpg difference. I'm looking for a diesel.
 
Reply
Old Dec 1, 2016 | 09:34 PM
  #3  
huntergreen's Avatar
huntergreen
Professional
Joined: Jan 2011
Posts: 226
Likes: 0
Default

duroc, a new 1500 with the higher hp and 8 speed trans with 3.92 would pull 7500 lbs without issue i have pulled 5500 lbs "aprox" with a 5.7 rcsb 4x4 3:55 gearing up and down the blueridge mountains. o power issues. i have read that some guys are having the same issue with the 6.4 and 3.73 gearing as you are having now.
 
Reply
Old Dec 2, 2016 | 02:18 PM
  #4  
Asmug's Avatar
Asmug
Banned
Joined: Dec 2016
Posts: 11
Likes: 0
Default

I have similar car!
 
Reply




All times are GMT -4. The time now is 12:45 AM.