I am looking at creating my own. I have measured the clearance and am looking at hinge and fastener options that would incorporate the bedrails possibly. If I can't work out the hinge, I will just make it 2 or 3 pieces and make it where I can take them off when needed. I already have 2 material choices, so I am going to experiment with them.

 

Well, I was looking around for the Tonneau Cover for my Ram w/ Rambox (I should say still looking) and for my surprise I ran into a Bakflip F1 model #72207RB. Now, I went to the Bakflip website and I didnt see there, so I email them to see if they actually have this item or if it was a typo in the other site.
http://www.tonnocover.com/Folding_Tr...2009A693A.html

 

Let me know what they say, I am very curious!

 

Yes, I'm about ready to buy myself since I have to have it before I leave in December for Christmas. Let us know what Bakflip says. That's really interesting. They have it listed for $989.76 with shipping included.

Jason

 

I havent heard from them but its listed in their site now....

http://www.bakflip.com/bak_flip/bak_flip_F1.html

If anybody decide to buy before I do, please post some pics of it installed...

 

Reference Post Below

 

FYI -- Calling is the best way to get a hold of them faster. 818-365-9000

I just called BAK Industries directly and they told me that the Rambox version of the F1 isn't ready. When I explained to the guy that it is on their catelog and offered for sale on at least two sites I know of, he explained that he couldn't explain that other than to tell me their engineers were still working on the design.

I then called the website you referenced and they in-fact had it in their system that it was ready to be purchased. Well, I explained to the guy on the phone that I had just talked to BAK Industries and that they informed me that it wasn't ready. He then placed me on hold and called his contact in the company and was told that it was planned for release already, however, in their testing they had an issue with the Rambox version and are still working the design for that model. They have no target date for release of the Rambox version. The site referenced above will be pulling them for sale since they aren't available so don't purchase one since they aren't available!

Keeping everyone informed,
Jason

 

I have the Extang, Back Flip, #EXG56420, installs with the cargo tie downs and drop in bed liner from Dodge. Seem weather tight and removed in 2 minutes or less, loosen two wing nuts and lifts off.

I got mine from a local dealer for $799 installed.

 

Dude! Not flaming, but what were you hauling that put that much weight on your suspension? I've had my bed nearly completely full of rocks and it didn't look like that. If it was because of the trailer, I'd say you badly need some weight distribution equipment.

 

I guess I willl call next time I have a question 'cause I haven't heard from them yet. Thanx HEMICrew for the info, and I will have to wait for them to fix all the bugs so I can see a pic of it installed.