When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
4th Gen Ram Tech2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
If you are in Canada a 1 gallon kit is $229.95 Canadian with gun and just kit without gun is $149.95. It is a little more in Canada as it covers importing from the USA, freight, duties and taxes, and brokerage fees but if you are in the USA it is about $95 usd for the 1 gallon kit and about $168 with gun.
Go onto the Al's Liner web site and you can find the closest distributor to your area and allot of them have web sites where you can go on and see pricing and shipping as well as being able to purchase online.
Most are a thinned out product so you can roll them or apply with a brush but Al's Liner is not and has to be sprayed with the hopper gun and it can be applied as thin or as thick as you want in one pass.
Hmmm, Al's contains 14 to 18% solvent, so it's a bit "thinned out".
...waiting for feedback from those who tried it......
Hmmm, Al's contains 14 to 18% solvent, so it's a bit "thinned out".
...waiting for feedback from those who tried it......
Sorry I should of maybe explained it or worded it better. Al's is an Acrylic/Polyurethane based product and being that it is this base it requires some thinner to get a consistency in the product to enable you to spray it and gives you the required time to spray (approximately 20 minutes) before setting up. Some products out there that I have seen, that you can roll, have up to 65% or more in thinners. Every product will have at least some type of thinners in it.
Sorry about the original misleading statement as I hope this clears it up a little. The pictures I posted on here are customers cars and trucks that have applied it themselves as when we sell Al's we ask them to send us shots of their project so we can post them on the site.
What kind of gun do they give you? It looked like a regular 1/4" tip paint gun. When I shot durabak I had to shoot it with an undercoating gun at 10% dilution with xylene. The rubber granules would clog the 1/4" tip. Hurry up sking, I really want to see the finished product!
Last edited by DodgeRam09; Oct 7, 2009 at 03:07 PM.