I'm going to install the AllGig for my RER radio. I'm not sure how to remove the radio on my 09 Laramie with center counsel.
Any tips?

 

i thought there was a DIY post on this?

 

https://dodgeforum.com/forum/4th-gen...am-1500-a.html

this is another guys forum, doesnt show the removal, but u can see where some of the bolt patterns are, dunno if it helps

 

http://forums.vwvortex.com/zerothrea...int&id=4548565

Try this link

 

DIY?? I can't seem to find it. Do you have a link?

 

I have a DIY at home, i will post the link after work for you

 

Here you go Mr.Kaiser THIS IS FOR A DODGE PICKUP NOT A ROUTAN LIKE THE PREVIOUS INSTRUCTIONS http://www.wkjeeps.com/sound/2009_Do...io_Removal.pdf the first page is kinda out of order it shows the wiring first...before you take apart the truck...anyway just scroll down should get you where you want, Are you removing an RER radio and putting in a different one? If so Pm me I might be interested in buying the RER radio from you. Good luck with the instructions.

Don't worry about the website wording wkjeeps, it's a site that has info on different vehicles. There is one thing that should be done before removing anything they say to undo the negative battery cable before starting but actually you should open the fuse box under the hood locate the radio fuse...mine was number 39 but yours might be different since you have a Laramie, anyway take out the radio fuse before removing the battery cable. Put the fuse back in after reconnection of the battery cable ...last thing you do. It is mainly for the REN radio which I think you are doing?? Not sure exactly from the first post.

If you need some help PM me I will call you I have free LD or you can call me whatever maybe I can talk you thru something you are not finding.

 

Took mine (radio - RER) out install the AllGig and did not disconnect the battery. No problems.