4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Level kit: Help tracking down part number

Thread Tools
 
Search this Thread
 
Old Apr 29, 2010 | 12:39 PM
  #21  
DIVERMAN's Avatar
DIVERMAN
Professional
Joined: Mar 2010
Posts: 137
Likes: 0
From: Mandeville,La.
Default

just left the dealer picking up my plate... i printed out the page from the catalog that some body posted the link to further up in the thread. went to the parts counter to get a price ($200.00) for the parts. asked about install, they had no clue and went and asked a tech. came back and said $750.00 for labor. don't think they understood it is a leveling kit, and not a full blown lift. i don't know what there rate is an hour, didn't ask, but i can do this in my drive way in half a day, maybe 2 hours with a lift. i used to be a tech, and have done lifts before. it's been years though. going to check with the local dealer (not the one i bought from).

ok, so i just pulled up the link to the catalog again a few minutes ago, and IT'S NOT THERE ANYMORE! the page number has even changed! it's on page 271 now and they only list the 4" lift kit for our trucks. the level lift they show is for the 2500/3500's. so i'm guessing they pulled it due to the problems???

i'll post back after i go to the other dealer.
 
Reply
Old Apr 29, 2010 | 06:51 PM
  #22  
010 Sport's Avatar
010 Sport
Registered User
Joined: Mar 2010
Posts: 49
Likes: 0
From: Fayetteville, AR
Default

subscribed.....
 
Reply
Old Apr 29, 2010 | 07:00 PM
  #23  
trashman139's Avatar
trashman139
Veteran
Joined: Feb 2010
Posts: 257
Likes: 0
From: beavercreek, OH
Default

see, this is what i mean... they really messed up this time. so much for getting a mopar leveling kit..
 
Reply
Old Apr 30, 2010 | 06:55 PM
  #24  
trashman139's Avatar
trashman139
Veteran
Joined: Feb 2010
Posts: 257
Likes: 0
From: beavercreek, OH
Default

come on guys don't give up on this thread. there has to be someone that is trying to put this on their truck. if its the leveling kit for the 2500 you never know it might work...
 
Reply
Old Apr 30, 2010 | 07:29 PM
  #25  
MTtruckr's Avatar
MTtruckr
Thread Starter
|
Rookie
Joined: Mar 2010
Posts: 78
Likes: 0
From: Minnesota
Default

It's not for the 2500, I checked on that and it was under a different number. It was a legit part, and as of a couple days ago was still in the dealers computers (I can't say if it still is, I was hoping DIVERMAN would get back to us). I have it on order and it could be here as soon as next week so stay tuned and something will come of it. Hopefully it's good news!
 
Reply
Old May 1, 2010 | 06:05 AM
  #26  
trashman139's Avatar
trashman139
Veteran
Joined: Feb 2010
Posts: 257
Likes: 0
From: beavercreek, OH
Default

MTtruckr good news please. we need a advocate. I so want to believe this is a true part, i can understand mopar pulling the part number they probably weren't ready for the influx of order call ins. I pray that it will so back up later down the road
 
Reply
Old May 1, 2010 | 12:10 PM
  #27  
DIVERMAN's Avatar
DIVERMAN
Professional
Joined: Mar 2010
Posts: 137
Likes: 0
From: Mandeville,La.
Default

sorry guys, plans went to **** right after i posted last. i will go by the 2nd dealer monday if i don't have to leave before then.
 
Reply
Old May 1, 2010 | 09:41 PM
  #28  
Frouburg's Avatar
Frouburg
Professional
Joined: Aug 2009
Posts: 188
Likes: 0
Default

The part is real, but it doesn't show up in the Mopar magazine, yet. I pushed the parts guy to do research on the part number (look at the first post, it is correct). He ended up calling someone at Mopar and they tracked it down. The part is vendor direct, so it is not mopar. The guy did not know who made it, but I had him put the order in. I am currently setup to get it installed on May 11th. I'll keep everyone posted, but this is for real, and will be sure to put up b/f and after pics.
 
Reply
Old May 2, 2010 | 05:04 AM
  #29  
trashman139's Avatar
trashman139
Veteran
Joined: Feb 2010
Posts: 257
Likes: 0
From: beavercreek, OH
Default

if you could please tell us the total price out the door, so i can get my money in order. even though its not mopar its nice they are going to warranty it. see if you can find out who makes the part.
 
Reply
Old May 2, 2010 | 10:24 AM
  #30  
MTtruckr's Avatar
MTtruckr
Thread Starter
|
Rookie
Joined: Mar 2010
Posts: 78
Likes: 0
From: Minnesota
Default

I was thinking it may be superlift because that's who does the 4 inch lift. Besides that, rough country fits the description and price of the lift because they have a 2.5 front 3/4 rear.
 
Reply



All times are GMT -4. The time now is 09:34 AM.