Kenwood Dnx 7360 installed
Champion
Joined: Dec 2007
Posts: 3,563
Likes: 0
From: Ontario, Canada
The way I got to the tailgate handle was I removed the bed liner cover and the tailgate cover from inside of the tailgate. I know some people say to remove the tailgate handle before you drill the hole for the camera, well I didn't and pretty much just eyed it and managed to get the hole perfect. Just to let you know that the camera I used was long and just by luck didn’t get in the way of the tailgate handle mechanism. To avoid that I would recommend and night vision camera because they tend to me shorter in length.
Rookie
Joined: Mar 2010
Posts: 56
Likes: 0
From: Los Angeles, California
Can you post pic's of the location you put the front camera. How does that camera get activated?
Professional
Joined: Feb 2006
Posts: 242
Likes: 0
From: America
I think he means he has made it possible to watch movies while driving. It is usefull for passengers. Give the guy some credit, why don't ya. Don't just assume he is an idiot. I have a pioneer avic z120-bt, and can also play movies while driving, but that doesn't mean I watch them. LOL...
Professional
Joined: Feb 2006
Posts: 242
Likes: 0
From: America
Yes . here is some information on how to change the speakers in the dash and doors. First remove the door covers, then remove the speakers in each door, next replace with new ones then replace door covers. do the same on the dash. did you really need to ask that.. if you did, maybe you should just go and have a professional do it for you, so you do not screw up your truck.
Professional
Joined: Feb 2006
Posts: 242
Likes: 0
From: America
Guys to make the unit fit in place i had to cut a piece of metal as the MYGIGs are not 2din but a little bit smaller no wire cutting required i used the pac module, everything is plug and play, for the gps antenna as i have the alpine sound i could not use the center grill in the front as there is a speaker inside (as far as i know is empty if no alpine sound) so the gps antenna is in the right side of the dash.
Anybody can pls tell me how to remove the rear handle cover as i would like to move the camera there?
@vulcan03 the unit I replaced was a rer that i moved in my wrangler.
Anybody can pls tell me how to remove the rear handle cover as i would like to move the camera there?
@vulcan03 the unit I replaced was a rer that i moved in my wrangler.