Find the Fuse
Amateur
Joined: Feb 2010
Posts: 45
Likes: 1
Just a note:
The "factory installed" remote starter does not need to be disabled, You only need to pull the fuse on an "Aftermarket" remote starter. (They are sometimes wired into the same power source the programmer uses so we recomend pulling as a precaution)
GW
Hypettech Inc.
The "factory installed" remote starter does not need to be disabled, You only need to pull the fuse on an "Aftermarket" remote starter. (They are sometimes wired into the same power source the programmer uses so we recomend pulling as a precaution)
GW
Hypettech Inc.
Find the Fuse
vaffanculo
Joined: Oct 2008
Posts: 7,954
Likes: 2
From: Pittsburgh, PA
I lived off Freedom Road in Cranberry Twp. for two years about 15 years ago...that place has exploded in the last decade. I live in McCandless and I thought McKnight road was a bastard, but Route 228 is worse,
FF
FF
Champion
Joined: Dec 2007
Posts: 3,563
Likes: 0
From: Ontario, Canada
we all heavy feet or we would be driving a gm or ford.
Professional
Joined: Jun 2009
Posts: 179
Likes: 0
From: Richland Center WI
I did a google search a while back and found the istall instructions for the factory remote start. It is wired up under the fuse panel under the hood. The instructions give you a step by step for the install of the remote start.
Thread Starter
|
Registered User
Joined: Mar 2011
Posts: 5
Likes: 0
Find the fuse
Thanks to all. I'm sure I'll be back with more questions. Like what settings are best for improved gas milege, using this Hypertech Max Energy programmer, instead of "hit and Miss trials!