4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Superchips Flashpaq 3865 Power Gains ?

Thread Tools
 
Search this Thread
 
Old Jul 31, 2013 | 01:32 PM
  #41  
RGVram99's Avatar
RGVram99
Professional
Joined: Mar 2009
Posts: 147
Likes: 0
From: Rio Grande Valley, Texas
Default

Mid 13's are great times! I have not seem any RCSB hit 13's at my track yet, even the R/T's are only hitting mid 14's. High humidity and heat have been slowing everyone down; I have been running 14.8's consistently for the past few months. My best time so far was a 14.4 @ 96 MPH during 60 degree weather. OH yeah, forgot to mention turn of your A/C when you want to launch hard!! I am not sure what it is (accessory drag or ESP nannys), but my truck will only break loose my tires from a dig with the A/C off and ESP off. Then I can lay a nice one wheel black strip for most of 1st gear, one day I'll get my LSD w/ 4.10 gears and it will be two!
 

Last edited by RGVram99; Aug 1, 2013 at 10:10 AM.
Reply
Old Aug 1, 2013 | 12:49 PM
  #42  
JohnVI's Avatar
JohnVI
Veteran
Joined: Mar 2009
Posts: 325
Likes: 0
Default

does anyone have specific settings they can post. also I did an advanced tune and selected MDS off but my fuel saver light still comes on telling me it ain't working. ...

just get lost witg what to set torque management to and the rev limit for each gear

and lastly can anyone get theirs to show a menu to change idle rpm level
 
Reply
Old May 9, 2014 | 05:43 PM
  #43  
JohnVI's Avatar
JohnVI
Veteran
Joined: Mar 2009
Posts: 325
Likes: 0
Default

Hey again
Long time since I posted to this thread. I wanted to see if anyone is using any custom Torque Management settings other than the 6%. I read someone using 8%, but wanted to ask. Also, anyone played with the shift points to liven up things a bit more...

John
 
Reply




All times are GMT -4. The time now is 11:11 PM.