EVIC issues?
#1
The following users liked this post:
Ronald Lazar (05-31-2022)
#2
http://www.wkjeeps.com/wk_evic.htm
Have you checked your fuses?
It may be a loose connector in the steering column asembly
Have you checked your fuses?
It may be a loose connector in the steering column asembly
Last edited by go-part; 01-19-2013 at 10:32 PM.
#3
I have the "cheap" info center on the Express and had this happen once. I gassed up and wanted to reset the trip meter and the display was just stuck on that mode. Tried shutting truck off and restarting and nothing? Next morning it was working fine and hasn't happened again???
Yesterday it was raining and the display was just blank? I pushed the buttons and nothing, truck off/on and nothing. Just went to work. Got out and it was fine? It was on a different display than it usually was on so the buttons worked but the display just wasn't showing anything.
Hate to bring it to the dealer for such a little thing but.....
Sorry I wasn't any help but wanted you to know you aren't alone!
Yesterday it was raining and the display was just blank? I pushed the buttons and nothing, truck off/on and nothing. Just went to work. Got out and it was fine? It was on a different display than it usually was on so the buttons worked but the display just wasn't showing anything.
Hate to bring it to the dealer for such a little thing but.....
Sorry I wasn't any help but wanted you to know you aren't alone!
#4
#7
Trending Topics
#8
#9
Unplug the clock spring harness, then plug it back in to see if anything changed.
If it still does the same thing, you`ll likely need the clock spring replaced.
Also, food for thought...
has anyone worked on the truck recently..???
has anyone previously installed any aftermarket electronic items..???
If it still does the same thing, you`ll likely need the clock spring replaced.
Also, food for thought...
has anyone worked on the truck recently..???
has anyone previously installed any aftermarket electronic items..???
#10
Unplug the clock spring harness, then plug it back in to see if anything changed.
If it still does the same thing, you`ll likely need the clock spring replaced.
Also, food for thought...
has anyone worked on the truck recently..???
has anyone previously installed any aftermarket electronic items..???
If it still does the same thing, you`ll likely need the clock spring replaced.
Also, food for thought...
has anyone worked on the truck recently..???
has anyone previously installed any aftermarket electronic items..???