Is my 4x4 working?

Reply Subscribe

Thread Tools

Search this Thread

Jan 30, 2018 | 10:28 AM

Jayde

Thread Starter

Registered User

Joined: Jan 2018

Posts: 3

Likes: 0

From: Long Island

Is my 4x4 working?

I’m gunna test it out later but when I select 4hi or lo nothing comes up on the dash. I have a 2010 2500 it has the 4x4 shifter on the floor not the ****. I see that there is a 4x4 light not illuminated

Jan 30, 2018 | 10:38 AM

HeyYou

Administrator

Joined: Apr 2010

Posts: 87,409

Likes: 4,214

From: Clayton MI

The lite should 'test' when you first turn the key on, before you start it..... Is it there?

Jan 30, 2018 | 07:06 PM

Jayde

Thread Starter

Registered User

Joined: Jan 2018

Posts: 3

Likes: 0

From: Long Island

Quote:

Originally Posted by HeyYou

The lite should 'test' when you first turn the key on, before you start it..... Is it there?

the light itself works. neutral works but no lights for that illuminate either. but no light when I put it into 4lo or 4hi.

Jan 30, 2018 | 08:59 PM

HeyYou

Administrator

Joined: Apr 2010

Posts: 87,409

Likes: 4,214

From: Clayton MI

Gotta be a switch on the shifter somewhere for that.... So far as I know, there is no axle disconnect on your truck, so, pull the lever, and its a 4x4. (independent front suspension, right?)

Jan 30, 2018 | 10:35 PM

Jayde

Thread Starter

Registered User

Joined: Jan 2018

Posts: 3

Likes: 0

From: Long Island

Quote:

Originally Posted by HeyYou

Gotta be a switch on the shifter somewhere for that.... So far as I know, there is no axle disconnect on your truck, so, pull the lever, and its a 4x4. (independent front suspension, right?)

I’m 99% the 4x4 is engaging now after driving in circles in a parking lot and think/ hope it’s just the transfer case switch. It’s my first 4x4 that I bought a week ago so I’m pretty new to this