She's a Beauty ..... 2004 Moded SRT-10.
#1
08-19-2012, 07:35 PM
Join Date: Dec 2009
Location: Connecticut
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
She's a Beauty ..... 2004 Moded SRT-10.
The Truck is a 2004 Regular Cab. 40000 miles on the Truck. 19000 miles over the last 6 years. The Truck was Stock when I bought it in early 2007. Since then I have invested $20000 + in the Truck. When I bought it the List at that time was $37500. At 28000 miles I had a Clutch, Pressure Plate, Throw-out bearing, Slave Cylinder, and New fly wheel installed. At 38500 Miles I went through the entire motor and had a Complete Rebuild / Ring job done. There are now 1500 miles on the motor since the rebuild. I have all paperwork for Rebuild if needed. The Truck is in excellent shape and below is a list of mods that I have done to the Truck over the past 6 years. I went Dark with all the lights on the Truck to a tune of 1200 bucks. Special Venom Hood that there were only 10 made of, hood and Paint 1400 bucks. The intake is Super unique, never seen another one like it. Black Powdercoat, then an Artist Air-brush rendering of a sweet Viper ripping out of the manifold, at a cost of 1000 bucks. The carfax on this vehicle is pages long with all the work that I have done to the truck. All work done by certified Viper techs. Kelly’s Blue Book for stock truck is $23,874.00. I have seen Stockers go for 28k, I will be asking $35,000 for this Truck.
Basics
2004 SRT-10 RC
8.3 liter V-10
Wheels - 22”X 10.5” Aluminum, & Tires - 305X40X22” Pirelli’s
Tremec T-56 - 6 Speed Std. Transmission
Dana 80 4:11 Rear
500 Watt 7 Speaker Infinity Audio w/12” woofer
Radio Upgraded to RB4 w/Nav Unit
With Mods 600+ FWHP, Top Speed 160 MPH
Performance
5 Tube Ceramic Coated Bassani Headers
3.0” JMB Mid Pipes with High Flow Cats
3.0” Magnaflow Exhaust w/4” Exits
X-Metal 74 mm Throttle Body
Centerforce Dual friction Clutch and Press-Plate
All Steel Viper Slave Cylinder upgrade
SCT – Tune – w/Max. HP Tune – Dyno Reference
Powdered Red JMB Cold Air Induction Kit w/Catch can
Performance Friction carbon metallic Brake Pads
B & M short throw 6 Speed narrow pattern shifter
170 Deg T-stat w/powdered red housing
JTVSP Hi-performance coils, and Plug wires
JTVSP Plug wire loom kit
Suspension:
Rear Drop - Lowered 2.5”
Front Drop - Lowered 1.5”
With JMB Powdered Red End link drop kit’s
Cal-Trac Powdered Red Traction Bars
Exterior
MV Performance Functional Viper Louvered Hood
Billet Chrome Hood Grille
Viper Powered Hood Labels - Gold on Black
JMB Hood Viper Skull Emblem - Black on Gold
Rear Bed Strips w/Viper Skull – Gold on Black “ Limited Edition”
Viper Skull Rear Window Graphic – Gold on Red
Tailgate Viper Lettering – Gold on Red
Plain License Plate Frame – Gold
Antenna Spacer Flame Red
All Dodge Badges removed – one on Tailgate SRT-10
Tint = 5% Rear Window – 15% Side Windows
Black Roll-and-Lock Bed Cover & Powdered Black Roll Cover
JTVSP Venom Rim Center Caps w/Viper Skull Red inset
Wiperless windshield w/Black stud caps
Dual Cal-Vue Powered/heated Mirrors – Red
Recon Digital Smoked Tail lights
Recon Night Shaded 3rd Brake light
Recon Projector Smoked Headlights w/Halo’s
Recon Smoked Halo fog lights
Triple Gauge Pod w/ Oil Temp, Shift Light-RPM, Multi-Gauge.
Under Hood Stuff
JMB Radiator Cover Brushed Stainless/Red lettering
JMB Fuse Box Cover Brushed Stainless/Red lettering
Under Hood Chrome Bolt dress up kit
Chrome Viper Skull Oil Filler Cap
Chrome Viper Skull Dip stick handle
All Reservoirs Painted High Gloss Black
6 Reservoir Covers are Turned Brass w/ clear coat
Chrome top of the motor bolt kit
Billet Chrome Hood Strut Covers
Polished Stainless “Viper” Valve Cover Lettering
Powdered Red T-stat Housing
Powdered Red Top Rad. Hard Pipe
Billet Chrome Gas Cable Bracket
Black Powdered Intake w/ Air Brushed Viper Graphics
Braided JTVSP Oil Lines
Braided JTVSP Power Steering Lines
JTVSP Hi-Temp Red Boot Covers
I Also have a Ton of pics as Mods progressed, But I’ll be showing pics of how the Truck looks today.
I also just purchased a Fitted 250 dollar Cover for the Truck, Everything goes with it. Also just bought Smoked Halo Fogs.
Carfax Check if you wish, I will send Vin # to anyone that wants it to check it out.
Thanks for looking ........
Jim
Basics
2004 SRT-10 RC
8.3 liter V-10
Wheels - 22”X 10.5” Aluminum, & Tires - 305X40X22” Pirelli’s
Tremec T-56 - 6 Speed Std. Transmission
Dana 80 4:11 Rear
500 Watt 7 Speaker Infinity Audio w/12” woofer
Radio Upgraded to RB4 w/Nav Unit
With Mods 600+ FWHP, Top Speed 160 MPH
Performance
5 Tube Ceramic Coated Bassani Headers
3.0” JMB Mid Pipes with High Flow Cats
3.0” Magnaflow Exhaust w/4” Exits
X-Metal 74 mm Throttle Body
Centerforce Dual friction Clutch and Press-Plate
All Steel Viper Slave Cylinder upgrade
SCT – Tune – w/Max. HP Tune – Dyno Reference
Powdered Red JMB Cold Air Induction Kit w/Catch can
Performance Friction carbon metallic Brake Pads
B & M short throw 6 Speed narrow pattern shifter
170 Deg T-stat w/powdered red housing
JTVSP Hi-performance coils, and Plug wires
JTVSP Plug wire loom kit
Suspension:
Rear Drop - Lowered 2.5”
Front Drop - Lowered 1.5”
With JMB Powdered Red End link drop kit’s
Cal-Trac Powdered Red Traction Bars
Exterior
MV Performance Functional Viper Louvered Hood
Billet Chrome Hood Grille
Viper Powered Hood Labels - Gold on Black
JMB Hood Viper Skull Emblem - Black on Gold
Rear Bed Strips w/Viper Skull – Gold on Black “ Limited Edition”
Viper Skull Rear Window Graphic – Gold on Red
Tailgate Viper Lettering – Gold on Red
Plain License Plate Frame – Gold
Antenna Spacer Flame Red
All Dodge Badges removed – one on Tailgate SRT-10
Tint = 5% Rear Window – 15% Side Windows
Black Roll-and-Lock Bed Cover & Powdered Black Roll Cover
JTVSP Venom Rim Center Caps w/Viper Skull Red inset
Wiperless windshield w/Black stud caps
Dual Cal-Vue Powered/heated Mirrors – Red
Recon Digital Smoked Tail lights
Recon Night Shaded 3rd Brake light
Recon Projector Smoked Headlights w/Halo’s
Recon Smoked Halo fog lights
Triple Gauge Pod w/ Oil Temp, Shift Light-RPM, Multi-Gauge.
Under Hood Stuff
JMB Radiator Cover Brushed Stainless/Red lettering
JMB Fuse Box Cover Brushed Stainless/Red lettering
Under Hood Chrome Bolt dress up kit
Chrome Viper Skull Oil Filler Cap
Chrome Viper Skull Dip stick handle
All Reservoirs Painted High Gloss Black
6 Reservoir Covers are Turned Brass w/ clear coat
Chrome top of the motor bolt kit
Billet Chrome Hood Strut Covers
Polished Stainless “Viper” Valve Cover Lettering
Powdered Red T-stat Housing
Powdered Red Top Rad. Hard Pipe
Billet Chrome Gas Cable Bracket
Black Powdered Intake w/ Air Brushed Viper Graphics
Braided JTVSP Oil Lines
Braided JTVSP Power Steering Lines
JTVSP Hi-Temp Red Boot Covers
I Also have a Ton of pics as Mods progressed, But I’ll be showing pics of how the Truck looks today.
I also just purchased a Fitted 250 dollar Cover for the Truck, Everything goes with it. Also just bought Smoked Halo Fogs.
Carfax Check if you wish, I will send Vin # to anyone that wants it to check it out.
Thanks for looking ........
Jim
Last edited by jimtete; 08-19-2012 at 07:43 PM.
