Big Radio Problem!!!
Thread Starter
|
Champion
Joined: May 2008
Posts: 4,210
Likes: 0
From: Shreveport, LA
I didnt see a reset button, i looked all over
I did get a lemon, and I already knew that...but why did it go from doing the white screen thing to no worky right when it blew all the fuses
I did get a lemon, and I already knew that...but why did it go from doing the white screen thing to no worky right when it blew all the fuses
Site Moderator
Joined: May 2008
Posts: 9,657
Likes: 24
From: Louisville, Ky
Operator error 
Seriously. you could have popped a capacitor or diode on the radio circuit board when you shorted the power wire. Usually Clarion is good stuff or at least they used to be.
Seriously. you could have popped a capacitor or diode on the radio circuit board when you shorted the power wire. Usually Clarion is good stuff or at least they used to be.
Hall Of Fame
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
If you connected both red and yellow to a 12v and black to ground and still nothing at all, then check the fuse on the HU harness and if thats not it them you popped something inside the HU. I did the same thing once and ended up having to send it off to be repaired.
Thread Starter
|
Champion
Joined: May 2008
Posts: 4,210
Likes: 0
From: Shreveport, LA
Yea I just dint know how it popped the HU if the power wire wasn't connected...my HU has gone out twice for the same reason, and they were different units...the customer service sucks by the way....but there is no external fuse either