i just installed a radio on my 1996 dodge ram 1500 and the radio wont turn on at all, i already checked the fuse for the radio.

 

Welcome! Have you double checked the power connections?

 

i double checked everything, i used a converter so i didnt have to cut any wires i just had to plug the converter into the truck and then the wires were pre cut so i just had to put the color with the right color.

 

You might need to run an additional 12v acc wire to the fuse block for power. I had to do this when I put an aftermarket deck in mine

 

Make sure the unit is grounded, especially with mopar radios.

 

I try averything but not thing.

 

If you have power and ground to the radio and it is not coming on, then the radio is defective or there is an internal fuse blown. Is this an aftermarket radio or an OEM out of another vehicle?

 

* You cannot interchange high speed bus models compatible decks with low speed models. Some vehicles have a high speed computer bus and others have low speed. They will not work properly. Furthermore, the code has to be reset at the dealer.