Dodge Caravan The Dodge Caravan is the best selling mini van from Dodge. How many Dodge Caravan owners here at DodgeForum.com would agree? Discuss it now!

How many o2 sensors?

Thread Tools
 
Search this Thread
 
Old Aug 11, 2008 | 08:59 PM
  #1  
aij3's Avatar
aij3
Thread Starter
|
Junior Member
Joined: Jul 2008
Posts: 4
Likes: 0
Default How many o2 sensors?

How many o2 sensors are there on a 2003 Grand Caravan Sport? 3.3l engine.

Where is the bank 1 sensor 1 o2 sensor referenced by code p0135 located? Is it that one to the rear of the engine (rear exhaust manifold, really hard to get too it seems) ?

I see two of them. The one I mentioned above and the one on the side of the catalytic converter. I thought I read a post somewhere saying that this vehicle has 3 02 sensors?

Please correct me if I'm wrong but this is how I understand it:

bank 1 sensor 1 is the 02 sensor on the rear manifold?
bank 2 sensor refers to the sensor on the side of the catalytic converter?
where is the other one if there are 3 of them?

Could anyone provide photos or diagrams showing where they are?

I have the haynes manual but it only references an upstream and downstream sensors.

Thanks.
 
Reply
Old Aug 11, 2008 | 09:28 PM
  #2  
master tech's Avatar
master tech
Site Moderator & Tech
15 Year Member
Joined: Apr 2007
Posts: 11,642
Likes: 108
From: Near Sacramento,ca
Default

There is two. one upsteam and one downsteam.
 
Reply
Old Aug 12, 2008 | 07:32 PM
  #3  
aij3's Avatar
aij3
Thread Starter
|
Junior Member
Joined: Jul 2008
Posts: 4
Likes: 0
Default

Hi Master Tech,

Thanks for the reply. Just a quick question on the tool I need. Is there a particular size o2 sensor socket for this particular o2/vehicle?

Could click on the link below and tell me if this would work?

http://www.canadiantire.ca/browse/pr...=1218583623815

Thanks again.

Originally Posted by master tech
There is two. one upsteam and one downsteam.
 
Reply
Old Aug 12, 2008 | 08:17 PM
  #4  
master tech's Avatar
master tech
Site Moderator & Tech
15 Year Member
Joined: Apr 2007
Posts: 11,642
Likes: 108
From: Near Sacramento,ca
Default

You can cut off the wire at the o2 sensor and use a 7/8 deep socket or box end wrench. Or a o2 sensor socket tool. Also 7/8 is the same as 22mm.
 
Reply




All times are GMT -4. The time now is 12:24 AM.