limp mode issues
#1
#2
The solenoid pack gets power from the output contacts of the shutdown relay (EATX relay???). The relay is energized by the TCM. I assume the TCM cuts power to the relay which in-turn cuts power to the solenoid pack when it enters "limp mode", indicating the TCM has detected a fault. Have you checked for codes? The system will generate a P0700 code in the PCM readable by a normal scanner or code reader. That indicates the TCM has stored a code. To read the TCM codes you'll need a specialized scanner.
Need wiring diagrams? Send me a private message with an email address.
Need wiring diagrams? Send me a private message with an email address.
Last edited by Cougar41; 09-21-2012 at 05:21 PM.