Code p1294, p0204
#1
Code p1294, p0204
I am in desperate need of anyone's help. My 2002 dodge grand caravan sport 3.3l v6 flex fuel, has been giving me hell. For about 3 weeks now it has been stalling on me and shutting off. I took it to auto zone and some codes came up, p1294, p0204 and another one i cant remenber. So far I have replaced the cam shaft sensor, crank shaft sensor, throttle position sensor, idle air position sensor, fuel injector #4, fix a vacuum leak and gave the throttle body a good scrub. Everything was ok until the problem started again same codes p1294 and p0204. Also my idle is all over the place and I can't seem to solve the RPM problem. When in park it's at 900, when in drive drops to 700 or 800and if I turn the AC on it drops to 300-400 the engine does a funny noice and then turns off. I have no problem turning it back on after that. Also when it turns off while driving is usually when I get of the highway or come to a stop on a red light or stop sign. Again no problem starting back up but will happen again if I come to a stop. If I put the engine in neutral and kind of two footed before I come to the stop is the only way to keep it from turning off.
Please help with what ever you can, Maybe I forgot something or you might know something I don't. Every opinion or advice is very appreciated.
Thank you!!!
Please help with what ever you can, Maybe I forgot something or you might know something I don't. Every opinion or advice is very appreciated.
Thank you!!!
#3
Master Tech, You are so spot on. The wires are fried and I am replacing the whole harness. The wires look like they can be fix but I really don't want to go have to do this again. Thank you for your help and I will keep you posted on the progress. If the is any one out there that can help me with the other problem, code 1294 please let me know.
Code p1294:
- Vacuum leak
- Throttle cable not free
- Idle speed screw misadjusted
Code p1294:
- Vacuum leak
- Throttle cable not free
- Idle speed screw misadjusted