2013 R/T Center Tail Light Replacment Manual?
CENTER


- Disconnect and isolate the battery negative cable.
- Remove the trim cover from the inside of the deck lid (3).
- Disconnect the body wire harness connector (4) from the center tail lamp (1) connector receptacle.
- Remove the eight nuts (2) that secure the center tail lamp to the inside of the deck lid inner panel.

- From the outside of the vehicle, grasp each end of the center tail lamp (1) firmly and pull straight rearward to disengage the two ball studs (2) from the two grommets (4) in the deck lid inner panel.
- Remove the center tail lamp unit from the deck lid opening.
To wind this up please know the pins that have to be dislodged by tugging the light out do not need to be popped back in. The barb on the pins is a one way action.
Just line them up, start a few nuts to hold her up and pull her in as normal and don't crank them down hard unless you want another cracked light.
Just line them up, start a few nuts to hold her up and pull her in as normal and don't crank them down hard unless you want another cracked light.


