Hello I was curious if I were to change the intake manifold on my charger along with my cam. Minus the new Tune I will need , is there any unforeseen items i may need to think about prior to commencing this project this year?

As always thank you for any and all assistance provided to this car enthusiast !

 

That's a bit vague, what intake manifold and what cam?

 

As for Cam

Stage 2 HRT 220/230 Hydraulic Roller Cam Kit for Dodge 5.7L HEMI w/ VVT 2009+

And for Intake I haven't made up my mind due to inexperience and knowledge but these 2 come to mind.....

Holley-Sniper FEI & Edelbrock-Victor EFI

 

You will lose power with both of those intakes, even with that cam, not enough engine. They're good for max performance NA engines and boost. Best all around street intake is the 6.4/392 manifold. I assume due to the work involved that you will be paying someone else to do this? I also assume you have purchased an unlocked PCM so you can get said car tuned?

 

Still have warranty left on the car? That kind of work will void it.

 

Magnoom, thank you for the insight, do you have any suggestions on where to search for the intake? besides Summit, Modern muscle ?

 

You won't find a 392 intake on either of those, you need to look at Charger/Challenger forums and ebay. Always someone pulling one off to put a blower on.

 

Last question, for now.
What concerns should I be prepared for and unknown additional parts will I consider to purchase along with the 6.4 intake?

 

Gaskets, stuff for oil change, some more coolant... The usual stuff.