Based on everything that I've learned here, I wouldn't recomend the 5" exhaust UNLESS you've modded the $**T outta your Ram. It's only gonna make things worse instead of better. I'd stick with the 4" all the way back.

 

It says that one's for the Ford Pooper Duty.

 

Alright, good call, thankyou.

 

Check the link out again:

http://www.kensps.citymaker.com/cata...80/3480752.htm

Either that, or give him a call. He's cool, he'll tell you if it'll work.

 

Oh, so that one sticks on the bottom of the winshield? That's smart.

 

Says 03-06 but I'm sure I can either make it fit or find one for 01

 

Kingdog got one like that and it mounts at the top of the windshield somewere near his mirror. I don't have a pic of it, hopefully he'll be on again soon. Keep your eye out for him. He loves it !!

 

Check out htis link for all of the Dodge gauge brackets:

http://www.kensps.citymaker.com/page/page/3830622.htm

Don't forget Geno's :

http://www.genosgarage.com/products.asp?dept=62

 

here's an autometer link to a 4 guage pod...

http://www.autometer.com/cat_mountsd...l=62&gw=11

most likely the same source as Mayfair came up with...

 

With the stuff you've done so far the gauges aren't really a must, when you really need them is when you start doing injectors and chips. If the gauges are going to cost you 300 you could just get one of the chips that has the gauges already built in. I know the attitude will show 4 things at a time, you could do EGT, boost, fuel pressure and tranny temp, or just set it to warn you if any of those things go out of limits and look at other things. When I picked mine up I got it for 650, so really you are spending 350 for the chip and 300 for the gauges.