Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

I have a 2004 ram 2500 SLT 4X4 Cummins and...

Old May 15, 2007 | 01:57 AM
  #1  
sallyman1's Avatar
sallyman1
Thread Starter
|
Captain
Joined: May 2007
Posts: 528
Likes: 0
From:
Default I have a 2004 ram 2500 SLT 4X4 Cummins and...

I just bought a used 2004 cummins 2500 SLT quad cab 4X4 auto trans.I luv it . It came with no owners manual.How can i tell what ratio my diffs are and if its limited slip or posi? Also wondering how I can tell what engine I have. Its a 5.9 diesel but I hear there are 3 choices:235 , 305 and 330 HP. How can u tell what HP rating yours is?How many speed is my tranny and what does the load haul button do? Im new to this truck thing as I had minivans all my life.help would be appreciated.
 
Reply
Old May 15, 2007 | 02:09 AM
  #2  
sharx ram's Avatar
sharx ram
Champion
Joined: Aug 2006
Posts: 4,537
Likes: 0
Default RE: I have a 2004 ram 2500 SLT 4X4 Cummins and...

Look inside the glove box, there is usually a sticker telling you the gear ratio...the engine has a sticker on it also, I believe it is on the drivers side. I believe in 04 there were only2 differant HP ratings, 325 came out in 05...(dont hold me too it but I believe thats the deal on that). The tow/Haul button is for when you are pulling loads, it helps to slow the truck down once youve touched the brakes...Ive heard that it also shuts down the over drive...Im sure some of the others can be more help, they will chime in shortly Im sure.
 
Reply
Old May 15, 2007 | 02:11 AM
  #3  
sallyman1's Avatar
sallyman1
Thread Starter
|
Captain
Joined: May 2007
Posts: 528
Likes: 0
From:
Default RE: I have a 2004 ram 2500 SLT 4X4 Cummins and...

thanks. Sodriverside engine on valve cover or on block for the HP rating?where in glove box?
 
Reply
Old May 15, 2007 | 02:13 AM
  #4  
jakebrake's Avatar
jakebrake
Champion
Joined: Feb 2006
Posts: 4,569
Likes: 0
From:
Default RE: I have a 2004 ram 2500 SLT 4X4 Cummins and...

I believe with the auto that your diffs are 3.55's not sure if they are limited slip or not, most likely they are. As sharx's said, the engine rating is on the driverside of the engine.
 
Reply
Old May 15, 2007 | 02:23 AM
  #5  
Super Dave's Avatar
Super Dave
Veteran
Joined: Mar 2007
Posts: 346
Likes: 0
From: Hill AFB, Utah
Default RE: I have a 2004 ram 2500 SLT 4X4 Cummins and...

ORIGINAL: sharx ram

Look inside the glove box, there is usually a sticker telling you the gear ratio...the engine has a sticker on it also, I believe it is on the drivers side. I believe in 04 there were only2 differant HP ratings, 325 came out in 05...(dont hold me too it but I believe thats the deal on that). The tow/Haul button is for when you are pulling loads, it helps to slow the truck down once youve touched the brakes...Ive heard that it also shuts down the over drive...Im sure some of the others can be more help, they will chime in shortly Im sure.
My 04 has the 325HP 600 engine, but it is technically an 04.5.
 
Reply
Old May 15, 2007 | 02:27 AM
  #6  
JimmyDiablo's Avatar
JimmyDiablo
Champion
Joined: Dec 2006
Posts: 4,360
Likes: 0
From: Tolleson, Az
Default RE: I have a 2004 ram 2500 SLT 4X4 Cummins and...

welcome to the world of trucks, you made a wise choice. I love my 05, went from toyota 4x4 1990 v6, to 06 hemi and then finally stepped up to a CTD. best choice I ever made.
 
Reply
Old May 15, 2007 | 02:33 AM
  #7  
sallyman1's Avatar
sallyman1
Thread Starter
|
Captain
Joined: May 2007
Posts: 528
Likes: 0
From:
Default RE: I have a 2004 ram 2500 SLT 4X4 Cummins and...

ok thanks. ill check into those things. has any1 here also noticed kinda sluggish take off in these dodge cummins trucks. Ive only ridden a few before and all are similar.even when not towing and just driving they are way sluggish off line compared to gas engine. is this normal? and also mine feels kinda jerky when i take off or corner and take off at a red light. also when i slow down at a red light to a complete stop it seems like there is a bangy feeling when u brake. to me it sounds like the automatic transmission downshifting. are these 2004 auto trannys computer controlled as well?
 
Reply
Old May 15, 2007 | 02:41 AM
  #8  
jakebrake's Avatar
jakebrake
Champion
Joined: Feb 2006
Posts: 4,569
Likes: 0
From:
Default RE: I have a 2004 ram 2500 SLT 4X4 Cummins and...

The sluggishness off the line is due to turbo lag. You got no boost, so no power. A few little goodies will take care of that
 
Reply
Old May 15, 2007 | 02:51 AM
  #9  
sallyman1's Avatar
sallyman1
Thread Starter
|
Captain
Joined: May 2007
Posts: 528
Likes: 0
From:
Default RE: I have a 2004 ram 2500 SLT 4X4 Cummins and...

true.1 more thing. what type of fluids go in what?is tranny filter located in tranny?

1.tranny=ATF+4 or what else? was wanting to do band adjustment and filter change
2.transfer case= ? ATF
3.diffs= 75w90 synthetic ?
4.how many grease points roughly on truck?
5.will i need gasket for tranny pan or just silicone?
 
Reply
Old May 15, 2007 | 02:52 AM
  #10  
sharx ram's Avatar
sharx ram
Champion
Joined: Aug 2006
Posts: 4,537
Likes: 0
Default RE: I have a 2004 ram 2500 SLT 4X4 Cummins and...

ORIGINAL: Super Dave

ORIGINAL: sharx ram

Look inside the glove box, there is usually a sticker telling you the gear ratio...the engine has a sticker on it also, I believe it is on the drivers side. I believe in 04 there were only2 differant HP ratings, 325 came out in 05...(dont hold me too it but I believe thats the deal on that). The tow/Haul button is for when you are pulling loads, it helps to slow the truck down once youve touched the brakes...Ive heard that it also shuts down the over drive...Im sure some of the others can be more help, they will chime in shortly Im sure.
My 04 has the 325HP 600 engine, but it is technically an 04.5.
I stand corrected, your right it was 04.5 when they came out with the bigger one...thank you
(now go back to sleep! hehehe
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:20 AM.