Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

Keyless entry unlock/honk settings

Thread Tools
 
Search this Thread
 
Old May 17, 2007 | 09:15 PM
  #1  
charzman's Avatar
charzman
Thread Starter
|
Junior Member
Joined: May 2006
Posts: 21
Likes: 0
From:
Default Keyless entry unlock/honk settings

I dunno what I am doing wrong compared to what is in the manual (Yes, I read the manual. Don't throw stuff at me). But for the life of me, I cannot get the truck to change from factory default settings so it won't honk when I lock it using the keyless and so it will unlock all doors when I hit the unlock button instead of just the drivers door. I've tried the steps in the book but it just does not want to cooperate.

BTW 2007 Ram 2500, 5.9 QC 4x4
 
Reply
Old May 17, 2007 | 09:43 PM
  #2  
triton's Avatar
triton
Record Breaker
Joined: Oct 2006
Posts: 1,498
Likes: 0
From: NC mountains
Default RE: Keyless entry unlock/honk settings

your not alone. I haven't bothered with it yet myself but, I've seen many posts about it. The trick seems to be trying is over and over. After the third or forth time it works.

It all else fails... you can have the dealer do it.
 
Reply
Old May 18, 2007 | 06:41 PM
  #3  
beachmstr's Avatar
beachmstr
Joined: Feb 2007
Posts: 784
Likes: 0
From:
Default RE: Keyless entry unlock/honk settings

I got mine set to unlock all the doors but i couldn't get it to not honk when i locked the doors.
 
Reply
Old May 18, 2007 | 06:55 PM
  #4  
chukar's Avatar
chukar
Rookie
Joined: Oct 2006
Posts: 72
Likes: 0
From:
Default RE: Keyless entry unlock/honk settings

Can't help on the honking when you lock, the lights on mine flash when locking (came like that). I did read the manual to turn off the stupid dinger for the seatbelt, but after 2 or 3 times I gave up and just leave the thing buckled and get in and out over the top of it.
 
Reply
Old May 18, 2007 | 07:45 PM
  #5  
minex's Avatar
minex
Veteran
Joined: Dec 2004
Posts: 291
Likes: 0
From:
Default RE: Keyless entry unlock/honk settings

For the record, I tried this last night. I have the exact same truck as charzman -- a 2007 Dodge Ram 2500 QC 5.9 CTD 4x4 SLT Big Horn.

After 20 attempts I gave up because I'm sure I was starting to annoy everyone in the neighborhood.
 
Reply
Old May 18, 2007 | 07:53 PM
  #6  
triton's Avatar
triton
Record Breaker
Joined: Oct 2006
Posts: 1,498
Likes: 0
From: NC mountains
Default RE: Keyless entry unlock/honk settings

so much for the several times theory. It can be done cause I've read others posts that did it. Maybe the dealer will have better luck ?
 
Reply
Old May 18, 2007 | 08:17 PM
  #7  
chukar's Avatar
chukar
Rookie
Joined: Oct 2006
Posts: 72
Likes: 0
From:
Default RE: Keyless entry unlock/honk settings

If it is an auto be careful at the dealer (personally I don't) but lots of others on here take it to the dealer for some easy fix, then it sounds like the trucks get possessed when in reverse with the door open hooking up to a trailer and such.

If I remember correctly, it is something that once done, cannot be undone.
 
Reply
Old May 18, 2007 | 11:10 PM
  #8  
gtxpooch's Avatar
gtxpooch
All Star
Joined: Mar 2006
Posts: 915
Likes: 1
From: Utah's Area 51
Default RE: Keyless entry unlock/honk settings

On the 06's it says to stand next to truck and hold unlock button down for about 10 secs then push the lock button or something to that effect. My lights flash but no honking. Also all doors unlock as well. Hope that helps
 
Reply
Old May 19, 2007 | 05:29 PM
  #9  
charzman's Avatar
charzman
Thread Starter
|
Junior Member
Joined: May 2006
Posts: 21
Likes: 0
From:
Default RE: Keyless entry unlock/honk settings

The backup-honk-door thing was stock with my truck. I didn't know anything about that until I was backing up my travel trailer at a campground at 2am. Needless to say it scared the ever lovin you know what out of me. Noisy enough to pass gas at night in a campground but the honking really pissed a few people off, I'm sure. I'll go out and mess with the keyless AGAIN and see if I can get this to work.
 
Reply
Old May 19, 2007 | 07:52 PM
  #10  
Charles Darwin's Avatar
Charles Darwin
Rookie
Joined: Feb 2007
Posts: 50
Likes: 0
From: In the middle of North Atlantic Ocean.
Default RE: Keyless entry unlock/honk settings

ORIGINAL: chukar

Can't help on the honking when you lock, the lights on mine flash when locking (came like that). I did read the manual to turn off the stupid dinger for the seatbelt, but after 2 or 3 times I gave up and just leave the thing buckled and get in and out over the top of it.
Does the manual say how to do that? I never found that, but am for sure going to look further!
Can you post the method, in case I don't find it?
I've already turned off the honking when I lock the doors, but it took perhaps 5-10 tries until I succeded.
 
Reply



All times are GMT -4. The time now is 02:03 PM.