Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

Autometer Gauges

Thread Tools
 
Search this Thread
 
Old Aug 1, 2007 | 01:57 PM
  #1  
kg1687's Avatar
kg1687
Thread Starter
|
Veteran
Joined: Jul 2007
Posts: 296
Likes: 0
From:
Default Autometer Gauges

Hey are the Autometer Phantom Gauges pretty decent? What about Issopro. In my gauges selection I have one ISSOpro?

Thanks
 
Reply
Old Aug 1, 2007 | 05:50 PM
  #2  
Mayfair's Avatar
Mayfair
Legend
Joined: Aug 2006
Posts: 8,529
Likes: 0
From: 100% Heaven Sent
Default RE: Autometer Gauges

I almost wentt with the isspro's, but I liked the electronic fuel pressure gauge and Autometer offered it so I went with Autometers. Now that I have them, I'm happy I did.
 
Reply
Old Aug 1, 2007 | 08:45 PM
  #3  
Dharris's Avatar
Dharris
Joined: Jan 2007
Posts: 10
Likes: 0
From:
Default RE: Autometer Gauges

ORIGINAL: kg1687

Hey are the Autometer Phantom Gauges pretty decent? What about Issopro. In my gauges selection I have one ISSOpro?

Thanks
I use the Phamtom series and I'm please with them. The green covers for the lamps do not match the original equipment colors well but they are ok. I don't like their temp probs.They are the old style that use two nuts and a lock washer rather then a formed electical connector like other gauges manufactures do.

I have never used ISSpro.
 
Reply
Old Aug 1, 2007 | 10:02 PM
  #4  
sharx ram's Avatar
sharx ram
Champion
Joined: Aug 2006
Posts: 4,537
Likes: 0
Default RE: Autometer Gauges

I run the Phantom guages also but have blue LED interior, the green LED would match the factory color
 
Reply
Old Aug 2, 2007 | 04:00 AM
  #5  
kg1687's Avatar
kg1687
Thread Starter
|
Veteran
Joined: Jul 2007
Posts: 296
Likes: 0
From:
Default RE: Autometer Gauges

K. I'm running a dual pyro set up. One on the exhuast manifold (issopro because it has the color analog gauge setup green-yellow-red) and then the Autometer Phantom. Everything else should be Autometer Phantom. I figured up where all of my extensive number of gauges Are going. Everybody here is probably going to think I'm an idiot for my choices but ehh... at least I'll be pretty sure if something is going wrong.
 
Reply
Old Aug 2, 2007 | 08:45 AM
  #6  
speakle's Avatar
speakle
All Star
Joined: Jul 2006
Posts: 863
Likes: 0
From:
Default RE: Autometer Gauges

I was looking at the autometers last night at DM and they look much better isspro. I could be wrong but isspro's look somewhat cheap when put next to one of the nice autometers.
 
Reply
Old Aug 2, 2007 | 11:41 AM
  #7  
RamFreak's Avatar
RamFreak
Veteran
Joined: May 2006
Posts: 411
Likes: 0
From: Kamas, UT
Default RE: Autometer Gauges

I am getting ready to do gauges, I am going with the Autometers as well. Is there any way of installing the pyro and boost without voiding warranty?

I want to install the pyro after the turbo, that is the best to judge safe EGT's for shutdown correct?
 
Reply
Old Aug 2, 2007 | 01:10 PM
  #8  
Mayfair's Avatar
Mayfair
Legend
Joined: Aug 2006
Posts: 8,529
Likes: 0
From: 100% Heaven Sent
Default RE: Autometer Gauges

YEP !!!

After the turbois where you'd want it for turbo cool down.
 
Reply
Old Aug 2, 2007 | 01:18 PM
  #9  
Dharris's Avatar
Dharris
Joined: Jan 2007
Posts: 10
Likes: 0
From:
Default RE: Autometer Gauges

ORIGINAL: 07CTDPOWER

I am getting ready to do gauges, I am going with the Autometers as well. Is there any way of installing the pyro and boost without voiding warranty?

I want to install the pyro after the turbo, that is the best to judge safe EGT's for shutdown correct?
If you have a Jake Brake there is a port for the probe.
 
Reply
Old Aug 2, 2007 | 02:51 PM
  #10  
kg1687's Avatar
kg1687
Thread Starter
|
Veteran
Joined: Jul 2007
Posts: 296
Likes: 0
From:
Default RE: Autometer Gauges


That's the issopro gauge i was planning on running.
Also I was planning on running some of my gauges in the cubby hole spot that the 3rd gen have .

Then planning on running the rest either here

and possibly here

Also going to have a 2 gauge steering column pod set up. But might change for the above becuase it looks pretty cool.
 
Reply



All times are GMT -4. The time now is 12:22 AM.