Red LED dot on instumentation before start
Champion
Joined: Mar 2004
Posts: 2,703
Likes: 2
From: Bremen, GA.
RE: Red LED dot on instumentation before start
Thy this on the seatbelt.
CUSTOMER PROGRAMMING SEQUENCE
NOTE: The following sequence of events must occur within 60 seconds of the ignition switch being placed in the ON position in order for the programming to be completed successfully.
[ol][*]With all doors closed and the ignition switch in any position except ON or START, buckle the driver side front seat belt.[*]Turn the ignition switch to the ON position and wait for the seatbelt indicator reminder function to conclude (about six seconds).[*]Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.[*]Turn the ignition switch to any position except ON or START to toggle the BELTMINDER feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed.[/ol]
CUSTOMER PROGRAMMING SEQUENCE
NOTE: The following sequence of events must occur within 60 seconds of the ignition switch being placed in the ON position in order for the programming to be completed successfully.
[ol][*]With all doors closed and the ignition switch in any position except ON or START, buckle the driver side front seat belt.[*]Turn the ignition switch to the ON position and wait for the seatbelt indicator reminder function to conclude (about six seconds).[*]Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.[*]Turn the ignition switch to any position except ON or START to toggle the BELTMINDER feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed.[/ol]