When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just wondering if anyone had any helpfull advice for my swap. I wanna put a cummins 4bt in place of my 360 gas motor. The truck is a 95 3/4 ton standard cab long box. Also if anyone has a running 4bt i would like to pay cash for it. Thanks for any info!
Yeah that is somthing im considering too. Im in SD and im havn a hell of a time finding any motor thats worth a crap. I either want to sell the truck now or swap motors and keep it. a 12v out of a 96'-98' would be best wouldnt it?
better off (and a lot cheaper) to just look for a truck that is already set up with a CTD. You'll save yourself a lot of headaches and expense trying to convert your current rig. Now if you like to do crazy stuff like that, go for it! I have done a lot of things with different vehicles such as convert a van to 4X4 (I wouldn't recommend it), put a foot clutch and hand shift on a chopper with 20" ape hangers (wouldn't recommend it) and built a stock bike with a 140hp engine (definitely recommend it!)
4bt is a good motor. . but if your gunna do it, do it right and find a 12 valve out of a 94-98.4 2500 and work the injector pump over a little. . .you may have to upgade the rear axel after a few hard launches, but it sure will be fun